NCS-TT106 PA Protocol Temperature Transmitter (Head Mounted)

Share on:


Price:$263.00 - $284.00
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


NCS-TT106 PA Protocol Temperature Transmitter (Head Mounted)




NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.

NCS-TT106 Temperature Transmitter supports Profibus PA protocol and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high cost performance. Based on the same hardware, the temperature transmitter also supports Foundation Fieldbus protocol.

NCS-TT106 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.

NCS-TT106 supports HART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.






Fieldbus temperature module’s power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.

The signal cable and bus cable cannot share wires or wire slot with other device power wire, and they shall be away from device with high power.

The shielded wires of bus ends shall be connected to the ground.


Features


Features:
Support multiple thermal resistances and thermocouples
Thermal resistance supports2/3-wire connection mode
Thermocouple can use cold end compensation function


Specification


NCS-TT106H HART
Input Signal
Pt100、Pt1000、CU50、CU100、0~500Ω、0~4000Ω
B,E,J,N,K,R,S,T eight kinds of Thermocouple
-100mV~100mV voltage signal0
Channel
Single
RTD Wiring
2-wire, 3-wire, 4-wire
Bus Power
HART: 11~35 VDC
Bus Signal
HART,current mode
Electric isolation
1000VAC
Working Temperature
-40℃~85℃
Humidity Range
5%~95%RH
Start Time
≤5s
Refresh Time
0.5s
EMC
GB/T 18268.1-2010
Protection
Terminal IP00, housing IP40
Voltage effect
±0.005%/V
Alarm signal
Alarm output can be set as 3.5…23 mA
Upper/lower limit current 20.8mA / 3.8mA
Current accuracy
0.03%


RTD Parameter at Normal Temperature
Signal type
Suggested range
Accuracy(25℃)
Temperature drift(per ℃)
Resistance Signal
0~500Ω
±0.04Ω
±0.001Ω
0~4000Ω
±0.35Ω
±0.015Ω
PT100
-200 ~ 850℃
±0.15℃
±0.003℃
PT1000
-200 ~ 850℃
±0.15℃
±0.005℃
CU50
-50 ~ 150℃
±0.15℃
±0.005℃
CU100
-50~ 150℃
±0.10℃
±0.003℃


Thermocouple Parameter at Normal Temperature
Signal type
Suggested range
Accuracy(25℃)
Temperature drift(per ℃)
mV
-100mV ~ +100mV
±0.025mV
±0.001 mV
B
500 ℃~ 1810℃
±0.77℃
±0.050℃
E
-200 ℃~ 1000℃
±0.20℃
±0.025℃
J
-190 ℃~ 1200℃
±0.35℃
±0.01℃
K
-200℃ ~ 1372℃
±0.40℃
±0.025℃
N
-190℃ ~ 1300℃
±0.50℃
±0.015℃
R
0℃ ~ 1768℃
±0.75℃
±0.023℃
S
0 ℃~ 1768℃
±0.70℃
±0.023℃
T
-200℃ ~ 400℃
±0.35℃
±0.015℃




Company Profile






Certification
Microcyber is the member of FCG (FieldComm Group) and the Profibus National Organization (PNO).
Microcyber has ISO 9001 certification.
As a Development Services Provider, Microcyber provides extraordinary services and solutions of Foundation Fieldbus technology.
Many of our products have passed FF certification, PA certification, HART certification, and NEPSI explosion-proof certification, etc.




Our Team
The Spirit of Microcyber Workers
Unity and cooperation, pioneering and enterprising, innovative and realistic, serving the society.
Microcyber Employment View
People-oriented, full of talents, fair competition, and common development.
Microcyber Corporate Culture
Carry employees' ideals, create customer value, and win corporate development.



FAQ


Q: What’s Temperature Transmitter 2-wire zero point calibration configuration?
A: For 2-wire measurement, 2-wire zero point calibration can be realized by modifying transducer block TWO_WIRES_COMPENSATION parameter. A

Q: Can I get the electronic manual?
A: Yes, please contact us.

Q: What type of cable should I use for wiring?
A: Fieldbus temperature module’s power and bus signal share a pair of cable, and it is called bus cable. It is suggested the user use fieldbus special cable recommended by IEC61158-2.

Q: Can you provided OEM service?
A: Yes, we can, such as communication board, we can also provided fieldbus development toolkit.


0.0456 s.