Сохранить в закладки:
Technical index FKM26 | Performance of F26 | ||||||
Density: | 1.8~1.84 g/cm 3 | The heat resistance of fluoroelastomer is the best at present. At high temperature of 200 ℃, the service life of type 26 fluororubber is more than 10000 hours. At 250 ℃, it can be used for a long time, even at 300 ℃. [However, it should be noted that when encountering high temperature above 300 ℃, such as flame of gas cutting gun, fluororubber will release harmful gas. Inhalation of these gases or entering the eyes can cause damage to human health.] | |||||
Tensile Strength: | 8Mpa | ||||||
Elongation At Break: | 160% | ||||||
Hot Air Aging: | 275℃ *24h | ||||||
Tensile Strength: | ≥ 8.0 Mpa | ||||||
Elongation At Break: | ≥ 150% | ||||||
Compression Deformation: | 55% ((200℃ *24h) | ||||||
Aviation Kerosene No.1Mass Change Rate(200℃ *24h): | ≤5% |