Raspberry Pi Dual 2,5 дюйма SATA HDD/SSD Плата расширения, X883 экран с USB 3-D разъемом для Raspberry Pi 4 Модель B

Сохранить в закладки:

Стоимость в USD:Показать (текущая цена)


  • В избранное

Описание и отзывы



  • This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.

  • The built-in LED light indicates the reading or writing status – no more guesswork again.





  • Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included

  • Due to installation restrictions, please pay attention to the thickness of the hard drive

  • As with all SSDs, new media must be formatted before use

  • Older SSD drives with less efficient flash media may not perform as well as newer drives




  • Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield

  • Supports dual 2.5 SATA HDDs/SSDs working at the same time

  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying

  • Function to power the RPI via XH2.54 only needing a single power supply

  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers

  • Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac

  • LED blue indicator indicates each drive status

  • Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi

  • Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)

  • Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)



Power Supply Requirement

  • Power supply: 5Vdc +/-5% , ≥4A

  • Ports & Connectors: DC jack - 5.5x2.5mm

  • Pls use high quality power adapter, or the HDD/SSD may cannot be recognized.



Packing List

  • 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)

  • 1 x Carrier Board (To mount raspberry pi on X883)

  • 1 x USB 3-D Connector

  • 1 x 2-Pin Power Connection Wire

  • 6 x Spacer F/F M2.5 x 14mm

  • 2 x Spacer M/F M2.5 x 14+5mm

  • 12 x Screw M2.5 x5mm

  • 4 x Screw M3 x 6mm

  • H0fc54b59e9234d158adecc99ac6cf090Z.jpg



0.0134 s.