Стойка для поддонов под напряжением, стойка для поддонов с отжимом назад

Сохранить в закладки:

Стоимость в USD:Показать (текущая цена)


  • В избранное

Описание и отзывы


Products Description

Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes "first-in-last-out (FILO)" access mode.

-Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
-Provide 20%-30% selectability
-Both safety and operating efficiency are higher than drive-in racks (drive through racks).
-Compared with adjustable pallet rack, it increases the utilization rate of the ground by about 60%.
-It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.

The main components are upright frames, beam, support rail, and carrying cart. The rack is bolted structure and easy to dismantle
and install to a new place.

Middle Cart
Made of square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearing. Design could be
different as clients' needs.
Small Cart or 1st Cart
Made of angle steel, square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearings. Design
could be different as clients' needs.
Protect Rail
Made of C-shape or U-shape steel. When ground level need no carts and pallet placed directly on ground. Protect rail is recommend.

Product Information

Rack Type
push back pallet rack
Rack Cost
Low, Medium Low,Medium,√Medium high,High,Higher
Pick-up Mode
first in, last out(FILO)
knock down or bolted
Forklift Aisle
around 3200mm,depends on customer's forklift parameter
Load Capacity & Dimension
Load capacity
customized based on clients pallet

core components
frame(upright,also called column or post,bracing,base plate,fasteners),
beam,support rail,cart,spacer
upright protector,frame protector, guide rail, protect mesh
Core Components Specification
80*60, 90*60, 90*70, 100*70, 120*95, 120*135

80*50, 100*50, 110*50, 120*50, 130*50, 140*50, 160*50
Epoxy resin electrostatic spraying(powder coating),galvanized
Coating thickness
no less than 60um for average thickness for powder coating
Q235B, or Q355

ral5015(sky blue),ral5005(signal blue),ral2004(pure orange),ral1003(signal yellow),ral7035(light grey)
Customized colors are available when order above 2*40gp containers

Store & Withdraw
Carrying cart runs along the inclined support rail. 1st pallet is placed on the carrying cart, 2nd pallet pushed back 1st pallet
into the rack, 3rd pallet push the front 2 pallets into rack, the rest keep the same operation.

Pallet at the pick-up end is carried out first, the next pallet slides to the pick-up point by gravity for unloading, other keep
the same.
Unlike drive in pallet rack, forklift truck don’t drive into the rack

Recommend Products

Our Services

Packaging & Shipping

To suit different clients needs,HBrack use different storage method.Following are rules followed.
For container order:
stretch film+carton board+packing belt+plywood stick+plywood pallet leg
For less than container order:
plywood box or other that can keep the product safe during transportation
based on clients' needs, such as vacum packing etc.

Buying Guides

Company Information

Nanjing Hongbo Metal Products Co., Ltd.(hereafter mentioned as HBrack) is a company full of vitality. He committed to providing clients with better metal products and service.
HBrack has designers who have been in warehouse rack design more than 10 years. They have rich experience in complex structure.
The products provided including adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage and other warehouse storage related products.
The service provided include storage rack design, producing and installation. The product done is from common pallet rack to complex mezzanine floor.


Question 1: Are you factory or trading company?
Answer 1:
We are factory and also do trading products related to warehouse rack.

Question 2:Do you provide sample? Is it free or extra?
Answer 2:
We provide sample parts free charged and you just need to pay the freight. When need whole sample rack for testing the possibility, please contact us for sample cost.

Question 3: I’d like to visit you. Which city should I go?
Answer 3:
We are in Nanjing. When needed, we can help you book hotel, traffic ticket. And we will pick you up to the destination place. We have sales person and driver who will be with you during the visit. You don’t have to worry about the traffic matter.

Question 4: Why choose you?
Answer 4:

1. HBrack have engineers who are professional in design warehouse rack more than 10 years and could handle from simple structure to complex one.

2. Your money is safe with HBrack. We accept trading through 3rd party. The sales person have rich experience in warehouse rack, all the personal information is trackable.

3. HBrack offer different design to help client control budget.

Похожие товары

0.0213 s.