Защита панели annunciator 4 zone (60453474671)

Сохранить в закладки:


Цена:*
Стоимость в USD:Показать (текущая цена)

Количество:

  • В избранное

Описание и отзывы

Характеристики


Product Description

Introduction:

1. This conventional fire alarm system designed based on EN54 part 2&4 standard.
2. Modularized design which can extend from 1 zone to 4 zones easily.
3. The conventional fire alarm system has 2 level control mode by a lock
4. It has FIRE and FAULT signal output, each zone with fire relay.
5. It has 24VDC and 5VDC power supply output.
6. It has 2 general sounders output.
7. Each zone has 1 circuit detectors input .
8. Each zone can be disable by a button.
9. Has RESET button to reset the panel.
10. Has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the main power is on.
13. The conventional fire alarm system has an optional GSM module for fire alarm by SMS .
14. It is economic, user-friendly and easy maintenance.

Parameters
Item name
Conventional 4 zone control panel
Model No.
AW-CFP2166-4
Power specification:
Mains supply voltage
110VAC or 240VAC
Internal power supply
27.2VDC
Total output current limited
3A @ 240VAC
Main supply monitor for fault
Yes
Each zone with fire relay
Yes
Battery protection for low voltage
Yes
Batteries (default configuration)
12V 2AH*2
Detector circuit specification:
Number of circuit
2
Line fault monitor for open circuit
Yes
Line fault monitor for short circuit
Yes
Line fault monitor for detector removal
Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device
6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes
 Silicon 1N4001 or Schottky type\t\t\t
 (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value
470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone
20 (based on a total detector current of 2mA, each detector consuming 100μA).
Maximum number of manual call points per zone
No limit
Sounder circuit specification:
Number of general circuits
2
End of line resistor value
6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit
Yes
Line fault monitor for short circuit
Yes
Outputs fused AT
400mA
Maximum number of bells @ 20mA of
each Sounder output
20
Fuses:
Battery fuse
1.5A F 20mm
Sounder outputs
500mA F 20mm
Fire output:
Output type
NC and NO relay
Maximum current
100mA
Connection block:
Largest acceptable conductor size
2.5mm2
Smallest acceptable conductor size
0.75mm2
Related Products
Our Company

Asenware Test and Control Technology Co., Ltd

Asenware Test and Control Technology Co., Ltd, founded in 2005, is distinguished by the experience and expertise of more than 11 years as one of the largest manufacturers and suppliers of China’s fire and security alarm products. Asenware is also a trusted brand of fire system solutions for all customers from all over the world.

Factory

The headquarter of Asenware is located in Baoan District of Shenzhen, China. The factory is in Torch Development Zone, Zhongshan. It has a strong management team , sales team and a capable R&D team as well, which has accumulated over 10 years rich experience in design, production and sales of fire alarm systems.

Our Service

* Over 10 years' experience.
* Prompt response.
* OEM & ODM is available.
* Support factory inspection.
* Standard quality control system.
* Different choices of payment and delivery.
* Independent R&D dept, designing dept,to meet your special need.
* Whole set of technical supports and with abroad projects experience.
* We are manufacturer, offer better price better production control.
* Sample order, customized order, bulk order are supported.
* Reliable after-sales service, with one year warranty. Fir

Certifications
FAQ

Q1. How about the quality of the products?
A: We produce every product with good quality materials, and test carefully to make sure stable quality before shipment. Fire fighting emergency lighting

Q2. Can I have an sample order?
A:Yes, Of course you can . we welcome sample order for your testing and checking products quality. Mixed samples are available.

Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. Small Qty order needs 3-5 working days, big Qty order usually needs 10-15 working days after payments arriving. That's depends on order Qty.

Q4. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
     Secondly We quote according to your requirements or our suggestions.
     Thirdly customer confirms the samples and places deposit for formal order.
      Fourthly We arrange the production.

Q5. How to proceed the order if I have logo to print?
A: We will prepare artwork for visual confirmation at first, if the color and position are alright, we will make print Logo sample from silk print factory and take picture for you to comfire before mass production.


60453474671
0.0125 s.