GONSIN 4/6/8/12 каналов IR одновременный переводчик Беспроводная система синхронного перевода с микрофоном интерпретации

Сохранить в закладки:

Стоимость в USD:Показать (текущая цена)


  • В избранное

Описание и отзывы


Product Description

IR Transmitter
The TC-Z902V/Z904V/Z906V infrared transmitter is a microprocessor based central unit which is designed to modulate and transmit 2/4/6 sound channels to different carrier frequencies. It features built-in IR test diodes for audio monitoring and testing of receivers, independent channel volume control, independent channel output level indicators, and independent channel audio output for sound recording. Test mode produces a different frequency tone for each input/channel. Two BNC sockets can link up infrared radiators in two lines. Multiple interpreter consoles can be connected to the transmitter in a daisy chain.

Modulation mode
Frequency synthesis
digital PLL
Frequency band
2.0 - 6.0MHz
Frequency response
Frequency stability
75 μSec
Peak deviation
Distortion at 1 kHz
Channel separation
RF output power level
RF output impedance
55-75 ohms
Input impedance
18k ohms
Max. input power level
AGC range
S/N ratio
Power consumption
Powe requirement
110/240VAC, 50-60Hz 
430×99×325 mm (W×H×D)

IR Radiator
The TC-H15 high-power infrared radiator can be switchable to 50% low power, making it suitable for use in larger halls and smaller rooms. The radiators integrated power supply unit is automatically switched on and off by the carrier signals from the transmitter by means of an high frequency sensor. The radiator is equipped with automatic gain control to ensure the infrared diodes function with maximum efficiency, and is naturally convection cooled for totally silent and maintenance-free continuous operation. It can be ceiling or wall mounted for permanent installation, or set up on an optional tripod for portable application.Multiple radiators can easily be daisy-chained together to expand coverage. The unit is easy to maintain and clean, with IR emitting diodes protected by the cover plate.

Frequency band
2.0 - 6.0 MHz
RF input voltage
IR output power
Power consumption
55W, Stand-by 8W
Switchable output level
Power Supply
110/240VAC, 50-60Hz
Coverage range
up to 30 meters
Operating temperature
Angle of half intensity
75Ω-4 coax, BNC connectors
RF output impedance
55-75 ohms
450×211×82 mm

IR Receiver
The portable TC-J902L/J904L/J906L infrared receiver is designed to receive 2/4/6 audio channels. The unit is powered by a more environment-friendly rechargeable Lithium-ion battery pack. The selected channel number and battery level can be displayed on LCD screen. The user may listen to any selected language on a personal earphone. Volume level can be adjusted through a thumbwheel switch for comfortable listening. Any number of receivers can be used within the radiator's effective coverage range.

Slide switch
Frequency range
2.0 - 6.0MHz
Thumbwheel switch
volume control
Frequency response
phone output jack
75 μSec
channel selection
Up/down push buttons
Peak deviation
channel number & battery level
Distortion at 1 kHz
Pocket clip and lanyard
S/N ratio
3.7V rechargeable Lithium-ion
Channel separation
Modulation mode
Frequency stability
Frequency synthesis
digital PLL
Power consumption
Integrated charging electronics & contacts
133×57×23 mm

Interpreter Console
The TC-F06 interpreter console is a digitally-controlled workstation allowing two interpreters to work in turn.
* Designed to be used for 6-channel simultaneous interpretation
* Gooseneck microphone and headset microphone can be used
* Built-in loudspeaker with volume level control
* LCD screen for specific information display
* 3.5mm jacks on both sides for MIC input and headphone/recording output
* 3 incoming languages can be preset, with pre-select A/B/C keys.
* Automatic channel interlocking prevents interpreters from using same outgoing channel
* Relay interpretation allows the interpreters to work from an active channel other than the floor
* MUTE key to enable a brief muting of the microphone for cough cut
* SLOW key to alert the current speaker to speak slowly
* Loudspeaker is automatically switched off when MIC is on or headset is used
* The floor signal automatically goes to the output channel after the microphone is turned off
* Multiple interpreter consoles can be connected in a daisy-chain
* Designed to comply with all related international standards & requirements.

Frequency response
built-in loudspeaker
Distortion at 1 kHz
< 0.1%
Operating temperature
Channel separation
> 85 dB
Standard mic stem length
425 mm
Signal-to-noise ratio
> 90 dB
backlit LCD screen
Max. input power level
ABS base
247 X 145 X 95mm
Operating voltage
3/5/10m cable with DB25 connectors
Power consumption
3.5mm jacks for mic, headphone, recorder


Audio Conference System, Network Conference System
Simultaneous Interpretation
Brand Name
Model Number
TC- J904LC/J906LC/J908LC/J912LC
Product Name
IR Interpreter

Why Choose Us

(1) Quality Assurance- Obtain multiple certifications and patents.

(2) Professional Services- There is an elite team including R & D, sales, production and technical services.

(3) Sold A Lot Overseas.

-GONSIN Products sell in more than 140 countries and regions around the world.

-More than 10,000 successful project cases worldwide.

-GONSIN has registered trademarks in 66 countries and regions around the world


1) What functions can this product package achieve?

Conference discussion and conference amplification. If you need to add conference display, automatic camera tracking, video conference and other functions, please contact customer service.

2) If I do not have the technical knowledge, can I install the equipment myself?
Certainly. This product package is designed for users with no installation experience. The entire conference system is easy to install. At the same time, Gonsin provides remote installation instructions for free. Just need to click the after-sales technical consultation button on the webpage, you can directly and quickly contact our professional technical engineers.

3)Are you manufacturer or trade company? Where?
We are manufacturer. which located in Jinyuehongtai Building, No.4 Chengye Road , Fengxiang Industrial Park, Shunde, Foshan, Guangdong, China.

4)What's your quality standard ?
Gonsin products meet the standard of ISO 9001:2008. Most of our products approved CE and FCC.

5)Can you provide some project cases you have did oversea?
*2016 BRICS Summit
*The 10th G20 Summit
*CELAC - European Union Ministerial Summit
*Asia-Pacific Parliamentary Forum
*European Commission - African Union ministerial meeting

6)How can I pay you ?
The Alibaba Trade Assurance is suggested , 100% safe for buyer (buyer can get the payment returned from alibaba if no receive correct goods ) .

Похожие товары

0.0079 s.