Описание и отзывы
self-leveling cement mortar for apartment floors
Self leveling concrete is a polymer-based mixture used to smooth or even out a concrete surface. Unlike traditional concrete, self leveling concrete mixtures are very thin. This allows the mixture to flow easily once it has been applied to a surface, relying on the forces of gravity to distribute the mixture evenly. When used to overlay or top an existing floor surface, self leveling concrete may as thin as a sheet of paper or as much as several inches thick.
1: Brushing interface agent
For self-leveling cement is a key step, even, once or twice.
2: Add water mixing
Add water according to the manufacturers requirements, better to use a graduated cylinder, stirring 3-5 minutes
Ground grouting, the use of special scraper scraping the thickness of the general 2-4Mm.
After filling in the ground using anti-foaming tool to eliminate air bubbles .
After the self-leveling cement grout before the Master takes 24 hours .
self leveling cement for floor screed,other name:Self leveling Floor compound,it is made from elaborate aggregate of special cement and foreign polymer spraying dry resin and special additive, it adopts foreign technic and formula, it’s nontoxic and environmental .It is the high strength & super fluidity self-leveling mix. It makes work easier with high fluidity, and it has perfect abrasion resistance with high strength
a.High liquidity, precise leveling automatic.
b.Fast setting and early strength, improve the construction efficiency.
c.Low consistency and easy construction.
d.Apply to heating floor.
E:Improve the lower layers intensity, avoiding cracking.
Mixing Water :
a. Self-leveling cement interface treatment: used for base course treatment before ground construction of self-leveling cement, improve the bonding strength between self-leveling and base course.l
b. Connection between the new and old concrete: used for the reinforcement of construction joints and beam column, reconstruction of old foundation, able to improve shear strength by 3 times.
c. Smooth base course plasterer: replace the smooth concrete surface process of soda-wash oil removal and manual roughing, able to improve bonding force over 6 times.
d. Brick plate paving: interface coating or paving block board directly after processed into high bonding force mortar, and available to paste new brick on an old brick.
e. Concrete repair and surface protection: used for surface protection of concrete and steel bar, to prevent deterioration and corrosion.
f. Oil pollution, sugaring base course treatment: coating and do plaster processing directly for the dusting and bit oil pollution base course.
g. Waterproof and moisture-proof, anti-corrosion: available to construct on damp base course, can be used as the moist insulation layer of oily coating, bonding firmly with polyurethane coating.
Tensile adhesive strength (Mpa)
Wear resistance (g)
Dimensional change rate (%)
24h compressive strength (Mpa)
24h anti-bending strength (Mpa)
28 days compressive strength (Mpa)
28 days anti-bending strength (Mpa)