Сверхмощная центробежная муфта GO Cart, 1 дюйм, отверстие 14 зубьев, размер цепи 41/420

Сохранить в закладки:

Стоимость в USD:Показать (текущая цена)


  • В избранное

Описание и отзывы


GO Cart heavy duty Centrifugal Clutch 1 inch Bore 14 Tooth 41/420 Chain Size
Specs:25.4mm Bore 14 Tooth#41/420 Chain1/4" keyway Engages at 2300 RPM
Up to 13 HP
Bi-Directional (Inboard or Outboard)
Load-free starting
Excellent quality at a competitive price
Easy to install
Longer life than competitive clutches

Integral key design
Sintered metal clutch shoes
Heat dispersing spring-to-shoe design
The Extreme-Duty Sprocket Centrifugal Clutch is ideal for the everyday demands of childrens yard-use go-karts. This clutch was designed to be a low-cost upgrade to the stock unit. A thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the clutch springs, resulting in longer life and better reliability.

There are many variables that play into the performance of a clutch. Tire size, rear sprocket size and rear drive set-up are a few of the main variables that could affect clutch performance. If you are using large tires or a small sprocket, your vehicle may require a belt drive system. Clutch performance is not based soley on the engine size.
Product name
Go Kart Centrifugal Clutch
Bore size
1inch (25.4mm)
Up to 13hp
Racing Go Kart/Minibike
Detailed Images
How to Adjust a Go Kart Clutch

Step 1 - Remove the Clutch

Before you start adjusting the clutch, remove it from the brake and check the pieces for signs of damage or other problems. One of the main problems with go kart clutches is their tendency to stick or lock during drives. If you have just adjusted your clutch so that you are driving more quickly, and a fault causes the clutch to lock suddenly, you may find yourself in an accident, or at least spinning out of the race. Ensure that all the parts inside your clutch are well-greased and able to move freely once back in position. You can then continue to adjust the clutch.

Step 2 - Get More Slip

If the clutch is not slipping enough when you move out of a turn, you can lose time adjusting the car to the clutch. One way to fix this is to alter the clutch so that it allows you more slipping. Turn the clutch with a wrench so that the oil plugs face 12 and 6 o'clock. You should then remove the plug which is next to 12. Insert an Allen key into the sleeve nut; then turn the engine until you can see this screw. Adjust it by turning clockwise. Turn all the other screws the same amount. Replace the plug and test out your adjustment on the track.

Step 3 - Get Less Slipping

If you find that you have now over-adjusted the clutch, stop the car as soon as you can, and use the Allen key to turn the screws counterclockwise to slightly shy of their original starting place.

You should then test the go kart again to see whether the slippage is now the correct amount. If you are still having trouble, stop the go kart again and use the Allen key to turn the screws slightly more toward their starting point. You should now be all right to drive without excessive slippage.

Repeat this action if you are experiencing too much slippage without having altered the clutch, but you will be turning the screws slightly counterclockwise from their starting position. Always test your go kart after altering the clutch but before you attempt to race it, so that you are in no danger of having an accident.

Other Products
         Go Kart Parts                                   Motorcycle Parts                        ATV CTV Parts                            MiniBike Parts
       Scooter Parts                               UTV Parts                              Bicycle Parts                            Customized Parts

Our Company
Taizhou Xinydd Machinery Co., Ltd. was founded in 2015. We located in Binhai Industrial Area, Taizhou, Zhejiang Province. We have professional engineers and management team in the producing of the clutches for U.S.A, Russian, Europe, Brazil, and other countries. We have enough ability to satisfy different requirements from yours in this field.Who could bring a lot of international experience and professional and an unparalleled level of service for you.
Packing Delivery
Our Service

Q1. How to pay?

A: TT, PAYPAL, WEST UNION, DP, DA, Credit card up to you.

Q2. What is your term of delivery?

Q3. How about your delivery time?
A: Generally, it will take 24-48 hours after receiving your advance payment. Some is one week. The specific delivery time depends on the items and the quantity of your order.

Q4. How to produce customized products?
A: Yes, We can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. How to get a sample?
A: We can supply the sample if we have ready parts in stock.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
     2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

0.0118 s.