Небольшая дробилка vsi с дизельным двигателем для карьерного проекта
- Категории: >>>
- Поставщик: Shanghai,Zenith,Mineral,Co.,Ltd.
Сохранить в закладки:
Описание и отзывы
Характеристики
Quarry project used small vsi crusher with diesel engine
 | Quarry project used small vsi crusher with diesel engine
VSI Vertical-shaft Sand Maker is commonly known as the impact crusher or aggregate shaper. small vsi crusher is the fourth generation of high-performance sand-making machine developed by ZENITH on the basis of introducing advanced German technologies about sand makers and analyzing domestic situations of mining industry. Taking small vsi crusher as the prototype, ZENITH has pushed out upgraded VSI5X Sand Maker and VSI6X Sand Maker successively.
Product Features: Lower maintenance costs, longer service life of vulnerable parts, quicker adjustments |
Quarry project used small vsi crusher with diesel engine introduction:
Big Capacity, Uniform Granularity
| Advanced Technologies, Eco-Friendly Production
|
| Digitalized Processing, Higher Precision
|
Vulnerable Parts Have Low Consumption But Long Service Life
| Sufficient Supply Of Spare Parts, Worry-Free Operation
|
Quarry project used small vsi crusher with diesel engine working principle:
VSI Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” and “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Then, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening.
Quarry project used small vsi crusher with diesel engine album:
Quarry project used small vsi crusher with diesel engine parameter:
| Model | Soft material | Hard material | Side and central feeding | Fully central feeding | Speed (r/min) | Power (kw) | Overall dimension (mm) |
| Maximum feeding size (mm) | Throughput (t/h) | ||||||
| VSI1140 | 50 | 45 | 450-520 | 225-260 | 1180-1310 | 200×2 | 5100×2690×3200 |
| VSI9526 | 45 | 40 | 300-380 | 150-190 | 1360-1510 | 132×2 | 4560×2450×2780 |
| VSI8518 | 40 | 35 | 200-260 | 100-130 | 1520-1690 | 90×2 | 4140×2280×2425 |
| VSI7611 | 35 | 30 | 120-180 | 60-90 | 1700-1890 | 55×2 | 4100×2250×2258 |
Note:
1.The bulk specific weight is calculated by 1.6t/m³. When the width of the feeding port is above 600mm, it is a large-scale machine while when the width ranges from 300 to 600mm, it is a medium-sized machine.
2.Product pictures and parameters about models, data, performances and specifications on this website are for reference only. There is a chance that ZENITH may make changes on above-mentioned information. For specific messages, please refer to the real objects and user manuals. Without special instructions, ZENITH keeps the right to explain all data involved in this website.
Customer Case
VIETNAM 250TPH DRY SAND MAKINGN PLANT
DESIGN CRITERIA
• Material: Limestone
• Output Size: 0-3mm
• Type: Indoor Plant
• Environment Criteria: No-water System; Low-dust system
• Application: Highway construction and Brick Making
Conventional technology for making sand adapts water-washing system to remove the find powder from the sand, where the percentage of powder must be controlled below 7%. As a result, powder will be transformed into mud and going to waste and contamination.
By taking use of our grinder technology, ZENITH R&D team designs a new sand making system without using water. What`s more, powder can be recycled and reused.
PROJECT ADVANTAGES
Excellent Quality of Sand- Sand manufactured from ZENITH VSI is with good shape, and percentage of each size particle achieves the International Sand Standard. Furthermore, customer can adjust the percentage by taking use of our separator according to their actual demand.
Powder Recycled and Reused- The powder recycled from our new process can be reused in brick making plant, what`s more that the quality of brick improves.
Interchangeability- Excellent layout design allows customer to do modification. Actually, our smart customer adds one more screen to separate 10-20mm product from our impact crusher due to its superb shape. (Advantage of our impact crusher)
Company Information
A VARIETY OF TRUSTED EXPERIENCE ZENITH has a variety of professional, reliable and efficient crushing lines all around the world. So customers have great confidence in us. |
INFINITE BRAND VALUE What ZENITH is doing is customizing economical and suitable production lines for customers and building brand value. |
1200,000 SQUARE METERS OF PRODUCITION AREA 6 large-scale manufacturing bases occupy 1200,000 square meters in total. So quick delivery is a matter of course. |
Shanghai Zenith Minerals Sales Co., Ltd. is a hi-tech, engineering group. We are specialized in the research, development, and production of industrial crushing, powder grinding, mineral processing equipments and other related devices. Our products have been sold to 120 countries and areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.
Zenith Factory
Headquarter of Zenith is located in Shanghai, China and now we have two manufacturing bases as our strong support. One is located in Shanghai about 450,000 square meters, and the other is in Qidong city, about 600,000 square meters. It takes about one-hour driving from Shanghai to Qidong city.
Exhibition
Zenith participate in various exhibitions frequently,such as Bauma China,China Import and Export Fair , Asia-pacific's International Mining Exhibition, Bauma Africa, CONEXPO Latin America , etc.
Get Price
If you are interested with our products, please don't hesitate to contact us now!
You can tell me the following questions, Then I can send you accurate quotation, including additional discount!
1. Which machine do you need? like stone crusher, grinding mill or beneficiation machine, etc.
2. what is your raw material plan to process? like limestone, granite or inron ore, etc.
3. The capacity you need. Like 100 tones per hour or 2000 tones per day.
4. Your contact information. Both Email and phone number are essential, we can contact you easier.
Now,please click the following contact to send us email or chat online!
