Кованый анкер для эрекции с ножной
- Категории: Metal Building Materials >>>
- Поставщик: Shandong,JCD,Metal,Hardware,Co.,Ltd.
Сохранить в закладки:
Описание и отзывы
Характеристики
Product Description
Erection Anchor , includes Erection Anchor with Shear Plate, Erection Anchor with Shear Plate and Cross Bar, Unilaterial Erection Anchor, Edge Lift Erection Anchor, Sandwich Panel Erection Anchor, X-foot Erection Anchor with Shear Plate, Universal Erection Anchor, Flat Anchor, Plate anchor, Spread Anchor, Two Holes Anchor, Drop forged Erection Anchor, and its related accessories, like Ring Clutch, Recess Plug, etc. For Precast Concrete items lifting and sling. The two hole anchor is designed to load range 0.7t to 26t. It is used for pre-struessed, thin walls, low strength concrete. The anchor age in concrete is achieved by a reinforcement tail that must be fitted to the anchor.
Iterm | Spread Anchor |
Craft | forging |
Materials | Q355B |
Size | 1.3T-22T |
Surface | Self-color |
Length | 90-350mm |
Direction for use
The Lift Anchors are useful for raising precast concrete panels from their horizontal casting position to a vertical position for
handling and shipping. When Lift Anchors are used in thin precast panels and under shear loading conditions, a special shear bar
must be used. The applied shear load tends to bend the anchor, allowing the lifting eye to apply load to the thin concrete section
above the recess plug. A properly installed shear bar captures the applied load and transfers it deeper into the concrete.
handling and shipping. When Lift Anchors are used in thin precast panels and under shear loading conditions, a special shear bar
must be used. The applied shear load tends to bend the anchor, allowing the lifting eye to apply load to the thin concrete section
above the recess plug. A properly installed shear bar captures the applied load and transfers it deeper into the concrete.
When raising precast panels from a horizontal position to a vertical position, always check both shear and tension safe working loads. In order to develop the anchor’s shear safe working load, the minimum spacing between Swift Lift Anchors is two times the corner distance listed
Size Information
Size Chart of This Design
Size | 2.5t | 5.0t | 7.5t | 10.0t | 14t |
thickness | 10mm | 15mm | 16mm | 20mm | 25mm |
Length | 90mm | 120mm | 160mm | 170mm | 350mm |
Related Products
Packing&Shipping
Company Introduction
Zerlinda
SHANDONG JCD METAL& HARDWARE CO.,LTD
JCD GROUP CO.,LIMITED
Tell:+86-532-80699006
Fax:+86-532-80699005
Website: www.jcdgroup.com.cn
Anything we can do for you pls feel free to contact me!
SHANDONG JCD METAL& HARDWARE CO.,LTD
JCD GROUP CO.,LIMITED
Tell:+86-532-80699006
Fax:+86-532-80699005
Website: www.jcdgroup.com.cn
Anything we can do for you pls feel free to contact me!
SHANDONG JCD METAL& HARDWARE CO.,LTD is one of the manufacturers and exporters of forging, casting, punching parts in Qingdao,China. Our products refer to precast system, scaffolding system, punching and kind of forging & casting machinery parts. The forging & casting parts include carbon steel forging,alloy steel forging, Grey iron casting, ductile iron casting, steel casting,die casting aluminum/zinc/bronze,precision casting and so on.
Похожие товары
