Diode Lipo Laser emits low levels of laser energy, which creates a chemical signal in the fat cells, breaking down the stored triglycerides into free fatty acids and glycerol and releasing them though channels in the cell membranes. The fatty acids and glycerol are then transported around the body to the tissues that will use them during metabolism to create energy. This process of fatty acid release is a natural response of the body when the body needs to used stored energy reserves, thus it is not creating any unnatural reaction in the body nor does it affect or damage any surrounding structures such as skin, blood vessels and peripheral nerves. A period of exercise post treatment will ensure the complete metabolism and thus elimination from the body of the freed fatty acids,This 5mw lipo laser system can adopts light to penetrate skin deep level to stimulate metabolism in result in keep result after slimming treatment Tied laser board band at the site of the need to lose weight, make laser for 20 minutes.
LipoLaser Function
* Keep the applicator in full contact with treatment area
* Keep the applicator at the same place
* Please use the strap to fix the laser pads
* Avoid the treatment over bone and do not aim directly to the joint
* Always make a skin fold in order to get better access to the fat tissue
* In case of resting during treatment, please “PAUSE” and then “STOP” to avoid over-output of the* machine
Applicator Installation
Attention:Please install 14 hand pieces Correctly before operate the machine.
Emergency stop button and Key Switch:
Big pads:10 pieces:Take the big lipo laser hand piece on the relevant holder,then insert it into the cavitation 2 pinssocket.
Small pads:4 pieces: Take the small lipo laser hand piece on the relevant holder,then insert it into the cavitation 2 pins socket.
Operation:
Set the treatment time :Touch to ajust the treatment time from 5 to 30 mins,(preset time:20 mins) 2.Set the laser mode :Touch to ajust the RF mode among Auto,M1,M2,M3 modes. 3.set the laser power :Touch to ajust the cavitation power level from 10% to 100% . 4.Touch any plaser pad to select the it to work 5.:touch it to start the treatment after all the parameter ajusted. 6.Pause button :touch it to pause the treatment,if need to change working mode,poweror treatment time during treatment,please touch it firstly,then change theparameters. 7.Back button :touch it to return to the main function interface,it would be touched aftertouching the pause button . 8.Stop button :touch it to stop the treatment.
