Fort "UP-2M" is a complex additive for concrete mixes and building solutions based on Portland cement. In accordance with GOST 24211-08, it is a highly plasticizing additive (OK from P1 to P4) with the effect of accelerating hardening (an increase in strength in the first day by 30% or more in equally mobile mixtures). Fort "UP-2M" differs from the well-known Fort "UP-2" additive by the presence of a superplasticizer in its composition and a change in the quantitative composition of the components. It was developed and implemented on the basis of research and recommendations of concrete scientists, as well as generalization of the practice of using Fort "UP-2" and similar compositions at construction industry enterprises in Russia and the CIS countries.
Scope of application:
- production of all types of concrete products, including with the use of TVO;
- production of reinforced concrete products without prestressed reinforcement with a dosage of the additive of no more than 2% of the cement weight (it is recommended to consult with the manufacturer of the additive);
- - production of ready-mixed concrete (without presenting increased requirements for the safety of the mobility of the mixture);
- production of products made of light concrete and foam concrete.
Fort UP-2M is used for:
- when compared with the Fort UP-2 additive, increase the workability, reduce the delamination of the mixture;- improve the appearance of products;
- save up to 20% of cement;
- reduce the cost of concrete in comparison with the use of known superplasticizers by up to 50%.
Documentation:
TU 5870-001-13453677-2004,
The products comply with sanitary standards:
Sanitary and epidemiological conclusion No. T-513 of April 16, 2012.
The products are not subject to mandatory certification.
Technical indicators:
Appearance
Powder: from light yellow to a dark brown color
pH value
5 ± 1
Mass fraction of dry matter
93% ± 5%
Packaging, storage and transportation:
It is recommended to introduce the Fort UP-2M additive into the concrete mixture in the form of an aqueous solution of working concentration (it is recommended to pre-dissolve the dry additive in water) together with the mixing water. After being introduced into the concrete mixture, it is recommended to ensure sufficient mixing time for an even distribution of the additive in the mixture. The mixing time is also selected by the consumer based on the conditions of the technology. The effectiveness of the additive for concrete directly depends on the chemical composition of cement and aggregates.
When changing the inert or binding agents of the concrete mixture, it is recommended to adjust the composition of the mixture in the laboratory.
Dosage:
0.5 – 0.8% of the cement mass by dry matter.
The optimal dosage is determined experimentally on the materials used.
Company Profile
The company "Fort"
In the world construction practice, the proportion of concrete containing additives is steadily increasing. In Russia, this figure is more than 80%. Today, chemical additives are used in all concrete production technologies, and also contribute to the emergence of new technologies that are simply impossible to implement without additives. At the same time, the most promising direction is the use of complex additives, which have several components in their composition that complement each other and improve the properties of concrete. The main issue that has to be solved when creating such modifiers is the selection of the optimal combination of components.
Today, the company "Fort" is one of the main and experienced players in the Russian market of concrete additives. Since 2004, Fort has been developing, testing, manufacturing and selling high-quality products. Many developments are carried out with the participation of specialists from construction and transport institutes (NIIZHB G.Moscow, PGUPS g.St. Petersburg, etc.), and the production is carried out on modern automated equipment by specialists with a high degree of training. Deep knowledge of the market, many years of experience in creating and developing production, multiplied by the scientific potential of Russian scientists, allow us to successfully solve the problem of producing products that are in demand by the huge construction industry.
Products
Fort additives are distinguished not only by the variety of areas of use, but also by their simplicity, safety and ease of use. And, as a rule, at an acceptable price, not to the detriment of the quality and efficiency of their use. A significant part of Fort's products are multifunctional complexes, which include components that have long been widely known to concrete workers around the world. Their properties have been studied and confirmed by many decades of application practice on construction sites of the USSR and the CIS, as well as other countries. The researchers were primarily concrete scientists of the former USSR and the CIS (F. Ivanov M., Batrakov V. G., Bazhenov Yu. M., etc.) The Fort company cooperates with some of them during the development of chemical additive compositions.
Product sales and customer service
A well-thought-out sales and dealer policy, a wide coverage of the regions of Russia and the CIS, ensure the delivery of Fort products to end consumers with minimal costs. The priority value in the company's development strategy is occupied by attentive and painstaking work with each client (selection of the necessary additives and further technical support by our specialists).
FAQ
1. Can I get samples?
- Sending chemical samples internationally is a very complex process. In fact, it is necessary to draw up a full-fledged contract. Therefore, the minimum batch is 1000kg or 1000l.
2. Can I have my own customized product?
- Everything is possible, except for changing the packaging itself. Changing the packaging is possible hgb orders from 200 tons per month.
3. How long does it take to calculate the shipping cost?
