Chanye single component liquid waterproof bitumen (asphalt)
- Category: >>>
- Supplier: CHANYE CHEMICAL INDUSTRY CORPORATION
Share on (10000002197117):
Product Overview
Description
Product Description
Product Description
RAW-100 is a mineral colloid bitumen emulsion for general waterproofing,concrete protection and metal protection. Which cures to form a flexible membrane. RAW-100 is designed for use on horizontal and vertical surface. RAW-100 is suitable for use as waterproof membrane on concrete,asbestos cement,mastic asphalt,slate,tile and metal surface.Uses
▪ Concrete roofs
▪ Retaining wall
▪ Balcony, toilet, bathroom
▪ Planter boxes
▪ Lining to water tanks
▪ Ground slabs and walls
▪ Concrete roofs
▪ Retaining wall
▪ Balcony, toilet, bathroom
▪ Planter boxes
▪ Lining to water tanks
▪ Ground slabs and walls
Advantages
▪ Easy to apply by brush, trowel and sprayer
▪ Forms a seamless and lap free membrane over the substrate.
▪ No flow or sagging on vertical surface
▪ Cures to form a flexible resilent barrier
▪ Can be applied to damp surface
▪ Crack bridging
▪ Easy to apply by brush, trowel and sprayer
▪ Forms a seamless and lap free membrane over the substrate.
▪ No flow or sagging on vertical surface
▪ Cures to form a flexible resilent barrier
▪ Can be applied to damp surface
▪ Crack bridging
Consumption
▪ 0.8 kg/m²(one coat)
▪ RAW-100 must be applied in minimum 2 coats.
▪ 3 coats may be required in areas of extremely high infiltration.
▪ 0.8 kg/m²(one coat)
▪ RAW-100 must be applied in minimum 2 coats.
▪ 3 coats may be required in areas of extremely high infiltration.
Dependent on the application area, substrate roughness, surface profile and thickness
Technical Information
Test Items | Test Required Value |
Tensile strength | >0.25 N/mm² |
Elongation at break | >600 % |
Tear Strength | >2 N/mm |
Application
▪ Cross coating on the construction surface with roller or brush also can apply by machine spray.
▪ After the first application of RAW-100, wait 4-8 hours (+23°C)(+73.4°F) before applying the second application
▪ At least 24 hours after the coating is completed, the follow-up work can be carried out (it can be applied with external tiles,
covered with cement mortar or painted with water-based waterproof topcoat).
Note:
▪ Operating time: 30 minutes~2 hours (temperature: + 15° C(+59°F) ~ + 35 ° C(+95°F))
▪ Cross coating on the construction surface with roller or brush also can apply by machine spray.
▪ After the first application of RAW-100, wait 4-8 hours (+23°C)(+73.4°F) before applying the second application
▪ At least 24 hours after the coating is completed, the follow-up work can be carried out (it can be applied with external tiles,
covered with cement mortar or painted with water-based waterproof topcoat).
Note:
▪ Operating time: 30 minutes~2 hours (temperature: + 15° C(+59°F) ~ + 35 ° C(+95°F))
12 months from date of production if stored properly in original, unopened and undamaged sealed packaging.
Storage Conditions
Store dry at +5°C(+41°F)~+35 °C(+95°F) Protect from moisture, direct sunlight, flame sources and freezing.
Technical data sheet(TDS)
Company Profile
Our Advantages
◆Professional
Specializing in chemical materials for 24 years.
◆Quality
With stable and high product quality.
◆Service
Professional team to provide service.
◆Performance Cases
Rich experience and a lot of actual performance cases.
◆R&D
Strong R&D team, constantly developing new products.
Specializing in chemical materials for 24 years.
◆Quality
With stable and high product quality.
◆Service
Professional team to provide service.
◆Performance Cases
Rich experience and a lot of actual performance cases.
◆R&D
Strong R&D team, constantly developing new products.
Exhibition
Packing & Delivery
FAQ
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
