Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals
Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals

Chanye porous, cement, mineral surface protective agent antiscalants & antifoulants chemicals

Share on (10000002782782):


Price:

Quantity:


Product Overview

Description





Product Description
The water-based single-liquid transparent protective topcoat can penetrate into the cement surface and form a protective layer on the surface. It can be used for indoor floor protection and decoration to reduce the penetration of water-based liquids, grease, oil and other dirt. In addition, its special water repellency prevents pollutants from entering the pores of the cement surface,
effectively improving stain resistance.

Uses
Suitable for all ground and non-grinding cement floors, as well as industrial artificial stone/terrazzo, etc. Application areas are commercial floors for indoor and outdoor use, market halls, industrial floors in shopping malls and supermarkets.

Advantages
▪ Stain resistance
▪ Water resistance
▪ Acid and alkali resistance
▪ Protect the substrate and maintain the original appearance

Consumption/Coverage
▪ 0.05-0.15 kg /㎡ (one coat)
This figure is theoretical and does not include for any additional material required due to surface porosity,surface profile,variations in level and wastage etc.
▪ Absorbent soil treat with AW-9000 , 2 coats is recommended.

Application
▪ Dilute AW-9000 with water from 1: 2
▪We recommend application with a sprayer and distribute the material with a microfiber mop.a thinly,smeary film should be remaining on top.Avoid drying up of the surplus protective film for rough.
▪ After the first application of AW-9000, wait first layer is hardened and strong enough before applying the second application.

Maintenance
▪ AW-9000 can walk in 8 hours
▪ AW-9000 will form a water and oil repellent effect after 2-3 hours, and full effect will appear after 24-48 hours.






Shelf Life
12 months from date of production if stored properly in original, unopened and undamaged sealed packaging.

Storage
Conditions Store dry at +5°C(+41°F)~+35 °C(+95°F) Protect from moisture, direct sunlight, flame sources and freezing.





Technical data sheet(TDS)





























We Recommend

New Arrivals

New products from manufacturers at wholesale prices

4.941 s.