2x6 pine / spruce / oak / teak sawn timber for framing wood lumber

Product Overview

Description

SAWN PINE AND SPRUCE TIMBER OF SOFTWOODS(coniferous species )

 

 

Species : Pine ( pinus sylvestris )
Finished : Sawn Timber & Elements

Quality : Grade A // AB
Moisture Content :KD 10% ± 2%

Sawnwood Timber/Planks/lumber
Thickness : 25mm // 32mm // 38mm // 43mm // 50mm // 60mm
Width : 80 and up // 100 and up
Length : 300-950mm // 1000-1700mm // 1800-2000mm // 2100-2400mm // 2500mm and up

Elements
25x25mm // 32x32mm // 38x38mm // 43x43mm // 50x50mm // 60x60mm
Length : 300-550mm // 600-800mm // 850-950mm

 

 

Moistness:	fresh cut
Volume:	up to 4000 cbm/month
Quality Requirements:
Grade "A"	4 sides clear without any defects sapwood, heartwood not allowed
Grade "A1"	3 sides clear up to 2..3 sound knots with max. diameter 10mm per running meter allowed only on bottom face sapwood, heartwood not allowed
Grade "B"	up to 2..3 sound knots with max. diameter 25mm per running meter allowed only on top face up to 2..3 dark non-lose knots with max. diameter 15mm per running meter allowed on both faces sapwood, heartwood not allowed
Grade "C"	knots with diameter 35mm allowed on both faces up to 1..2 sound knots with max. diameter 50mm per running meter allowed heartwood up to 50% length of the board only on bottom face is allowed through sapwood is allowed
General Requirements:	rot, insects, wormholes not allowed face, end and edge cracks not allowed ring shakes not allowed