Share on (10000007898407):



TBL-501 Series High-temperature Vulcanized Silicone Rubber Translucent HTV Solid Silicone Rubber Raw Material Hardness 30 40 50 60 70 80 Shore A | ||||||||||||||
Product Type | General Molding Products | |||||||||||||
Product Model | TBL-531 | TBL-541 | TBL-551 | TBL-561 | TBL-571 | TBL-581 | ||||||||
Appearance | Translucent | Translucent | Translucent | Translucent | Translucent | Translucent | ||||||||
Williams Plasticity | 110-140 | 120-160 | 150-190 | 190-250 | 210-270 | |||||||||
Density (g/cm3,25℃) | 1.05-1.15 | 1.11-1.16 | 1.13-1.17 | 1.15-1.18 | 1.19-1.22 | 1.22-1.25 | ||||||||
Vulcanization | Type | C-6 | C-6 | C-6 | C-6 | C-6 | C-6 | |||||||
Dosage (%) | 1% | 1% | 1% | 1% | 1% | 1% | ||||||||
After Vulcanization | Linear Shrinkage (%) | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | |||||||
Hardness (Shore A) | 30±2 | 40±2 | 48-53 | 60±2 | 70±2 | 80±2 | ||||||||
Tensile strength (MPa) | ≥6.0 | ≥7.5 | ≥7.0 | ≥6.5 | ≥6.0 | |||||||||
Elongation (%) | ≥630 | ≥500 | ≥370 | ≥330 | ≥200 | |||||||||
Tear Strength (KN/m) | ≥14 | ≥15 | ≥16 | ≥19 | ≥13 | |||||||||
Compression Set (%) | ≤10 | ≤5 | ≤6 | ≤6 | ≤7 | |||||||||
Temperature Tolerance (200℃/2h) | No Obvious Yellowing | |||||||||||||
Above data for reference only, factory quality inspection report shall prevail for latest testing standard and data. | ||||||||||||||









New products from manufacturers at wholesale prices