China Direct Supply Stainless Angle Bar Steel Stainless Steel Rod 2mm 316 316l Ss Bar Aisi Astm Sus 304 304l
- Category: >>>
- Supplier: Shandong Zhongyi Steel Co. Ltd.
Share on (10000009482536):
Product Overview
Description
Product Description
stainless steel bar
304 Stainless Steel
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
316 Stainless Steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
430 Stainless Steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
430 Stainless Steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Chemical composition | ||||||||||
Grade | C | Si | Mn | Cr | Ni | |||||
304 | ≤0.07 | ≤1.00 | ≤2.0 | 18.00~20.00 | 8.00~10.50 | |||||
304L | ≤0.030 | ≤1.00 | ≤2.0 | 18.00~20.00 | 9.00~13.00 | |||||
310S | ≤0.08 | ≤1.00 | ≤2.0 | 24.00~26.00 | 19.00~22.00 | |||||
316 | ≤0.08 | ≤1.00 | ≤2.0 | 16.00~18.00 | 10.00~14.00 | |||||
316L | ≤0.03 | ≤1.00 | ≤2.0 | 16.00~18.00 | 12.00~15.00 | |||||
321 | ≤0.08 | ≤1.00 | ≤2.0 | 17.00~19.00 | 9.00~13.00 | |||||
904L | ≤0.02 | ≤1.00 | ≤2.0 | 19.00~23.00 | 23.00~28.00 | |||||
2205 | ≤0.03 | ≤1.00 | ≤2.0 | 22.00~23.00 | 4.5~6.5 | |||||
2507 | ≤0.03 | ≤0.08 | ≤1.20 | 24.00~26.00 | 6.00~8.00 | |||||
Specification
Product name | Stainless steel round bar |
Material | 304,304L,309S,310S,316,316L,316Ti,317,317L,321,347H,201,202,405,409，etc. |
Stanard | JIS, AISI, ASTM, GB, DIN, EN |
Dimensions | DIA 4mm-500mm |
Length | Any length as customer requests |
MOQ | 1 Ton |
Finish | 2b, BA, No.4, 8k, hairline, embossed, etched, vibration, pvd color coated, titanium, sand blasted, anti-fingerprint |
technique | hot rolled, cold rolled |
Delivery time | 7-15 days |
Application | Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate |
Price term | CIF CFR FOB EX-WORK |
Payment Term | 30%T/T Advance + 70% Balance |
Packing | 1.Exportsea worthy packing with each bundle tied and protected 2.Or as to clients' requirements. |
Supply Ability | 5000 tons per month |
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, building materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, NO.2B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and exter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Packing & Delivery
Packing Information of Stainless steel bars:
packing: Seaworthy fuming wooden box export packing, suitable for long distance ocean transportation
packing: Seaworthy fuming wooden box export packing, suitable for long distance ocean transportation
Company Profile
Shandong Zhongyi Steel Group Co., Ltd. is located in Jinan, Shandong Province. It is a specialized steel sales company integrating domestic trade and foreign trade.
The company's products include stainless steel, seamless pipe, color coated plate, galvanized sheet, aluminized sheet, aluminum sheet, copper sheet and other profiles, building materials, pipe series. Products are widely used in chemical, pharmaceutical, electric power, railway, automotive, paper and construction engineering.
All raw materials are of first-class quality and come from reputable merchants. The product is widely used in the industry,Our products have the characteristics of heavy load resistance, strong structure, good surface finish, high flexibility, corrosion resistance, durability, corrosion resistance, high tensile strength, etc
For 20 years, the company has focused on the supply of steel products at home and abroad, and has established long-term and stable cooperative relations with a number of retailers and agents. It enjoys a high reputation in the steel industry.
The company has passed ISO9001 quality system certification and CE certification. All products conform to American Standard ASTM, Japanese Standard JIS, German standard DIN, British Standard BS, etc. We support SGS, BV third party testing. Our philosophy is customer-oriented, win-win cooperation, our product tenet is "focus, focus, professional"Welcome customers and friends from all over the world to our company.
For 20 years, the company has focused on the supply of steel products at home and abroad, and has established long-term and stable cooperative relations with a number of retailers and agents. It enjoys a high reputation in the steel industry.
The company has passed ISO9001 quality system certification and CE certification. All products conform to American Standard ASTM, Japanese Standard JIS, German standard DIN, British Standard BS, etc. We support SGS, BV third party testing. Our philosophy is customer-oriented, win-win cooperation, our product tenet is "focus, focus, professional"Welcome customers and friends from all over the world to our company.
FAQ
1.Q: What guarantee do you have for your products? Do you have quality control?
All products are manufactured by certified workshops and inspected piece by piece in accordance with national standards to ensure that the chemical composition, mechanical properties and purity of the materials fully comply with international standards. Test certificates can be provided for products, and third-party inspections can also be provided. We can also issue a warranty to the customer to guarantee the quality.
2.Q: How long is your delivery time?
If the goods are in stock, it is generally 3-5 days, about 7-10 days for regular models, 10-15 days for special sizes and processing, mainly based on order quantity and requirements.
3.Q: What are your payment terms?
Payment <=5000 USD, 100% prepayment. Payment>=5000 USD, 30% advance payment + 70% payment before shipment (or see copy of bill of lading; or irrevocable L/C at sight), also accept 100% irrevocable L/C at sight
4.Q: Do you provide free samples?
You can get available samples in our stock, stock samples are free, but you need to pay for shipping. Custom samples are also available, and custom samples take 5-7 days. The cost incurred by the customer because of the sample, we will refund the cost after you place the formal order.
5.Q: Can we visit your factory?
Of course, we warmly welcome customers from all over the world to visit our factory, once we have your schedule, we will arrange a professional team to follow up your situation and take you to visit our factory. If you are unable to come to the site for various reasons, we can also arrange a video to show you our factory.
All products are manufactured by certified workshops and inspected piece by piece in accordance with national standards to ensure that the chemical composition, mechanical properties and purity of the materials fully comply with international standards. Test certificates can be provided for products, and third-party inspections can also be provided. We can also issue a warranty to the customer to guarantee the quality.
2.Q: How long is your delivery time?
If the goods are in stock, it is generally 3-5 days, about 7-10 days for regular models, 10-15 days for special sizes and processing, mainly based on order quantity and requirements.
3.Q: What are your payment terms?
Payment <=5000 USD, 100% prepayment. Payment>=5000 USD, 30% advance payment + 70% payment before shipment (or see copy of bill of lading; or irrevocable L/C at sight), also accept 100% irrevocable L/C at sight
4.Q: Do you provide free samples?
You can get available samples in our stock, stock samples are free, but you need to pay for shipping. Custom samples are also available, and custom samples take 5-7 days. The cost incurred by the customer because of the sample, we will refund the cost after you place the formal order.
5.Q: Can we visit your factory?
Of course, we warmly welcome customers from all over the world to visit our factory, once we have your schedule, we will arrange a professional team to follow up your situation and take you to visit our factory. If you are unable to come to the site for various reasons, we can also arrange a video to show you our factory.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
