Share on (10000018604474):


Input: HDMI IN 1-2 | 2x HDMI 1.3 (Type A) Max resolution: 2048×1152@60Hz Min resolution: 800×600@60Hz Custom resolutions supported Width range: 800–3840 pixels (Forced) Height range: 600–3840 pixels (Forced) Supported frame rates: 30 Hz, 50 Hz, 60 Hz Do NOT support interlaced signal input. HDCP 1.4 compliant, backwards compatible |
USB 2.0 1-2 | 2x USB 2.0 to support a mouse, keyboard, USB drive and other common USB devices Supported image formats: *.jpg, *.bmp, *.png Supported video formats: *.avi, *.mpg, *.vob, *.mov, *.mkv, *.rmvb, *.mp4, *.ts, *.flv Supported file systems: FAT32, NTFS; not supported: exFAT, FAT16 |
Output:1-6 | 6x RJ45 (1Gps) In pixel-to-pixel output mode: load capacity up to 2.6 million pixels When scaling function enabled: load capacity up to 3.9 million pixels (max width: 4096 pixels; max height: 1920 pixels) |
HDMI OUT | Support output of standard 1080p videos only. |
SPDIF | For digital fiber optic audio output |
ETHERNET | Connect to external network or to the NovaLCT software on the control PC |
SENSOR | 1x sensor connector to connect to the light sensor or temperature sensor |
Phoenix connector (4 pins) | 1x RS232 central control connector (4 pins) to connect to the central control device Baud rate: 115200 bps Data bits: 8; stop bits: 1; no parity bit; no flow control |
Phoenix connector (6 pins) | 1x IR IN Support the learning of the infrared control instructions. 1x IR OUT Support the programmable infrared control. 1xI/o − Trigger the execution of various function requirements via programming. − Support the input and output modes. − Input and output I/O voltage: 3.3 V 1x RELAY − Connect to a relay to control the switch on and off of the connected device. − Voltage: 30 V DC;max current: 3 A 1x GND A grounding connector |
Wi-Fi AP 1-2 | Specifications: 2T2R. Connect to the Wi-Fi antenna and Bluetooth antenna. |
Wi-Fi STA | Specifications: 1T1R. Connect to the Wi-Fi antenna |




New products from manufacturers at wholesale prices