Manufacturing hammered aluminum sheet

Product Overview

Description

Manufacturing hammered aluminum sheet  

1)Dimension

 

Thickness: 0.2----300mm;

Length:1000-12000mm or as your requirements; 

Width:100-3000mm or as your requirements;

 

2)Standards

Standards: GB 3199-1990 and GB 3880-2006

Above 8mm, tolerance: ±0.5mm

Below 8mm, tolerance: ±0.0mm

 

You can't see any tiny space between the plates when they are piled up.

And the surface is smoothly without freckles

 

3)Shipment

Port: NingBo or according to customers’ requirement

Packing: standard packing for ocean shipment, anti-static corrosion.

Lead time: 20 days

 

4) Specification:

Temper	O,H14,H24,H28,H32,H34,H111,H112
Tensile strength	190 Mpa
Strength	140 Mpa
Elongation	22%
Hardness	60 HB
Denseness:	2.69 g/cm
Welding capacity	nice
Cutability	nice
Anti-corrosion	good
Conductance	50- 63% IACS

 

2. Our Aluminium sheets related products

 

1. Coil sheet, Mill finish aluminium sheet (MFP),

 

2. Color coated aluminium sheet

 

3. Checkered plate (TLP in nickname of , checker plate, Tread plate, diamond plate, chequer plate),

 

4. Mirror finish aluminium sheet (Mirror reflective aluminium sheet),

 

5. Anodised aluminium sheet (two side anodised, only silver color available.),

 

6. Stucco aluminium sheet (orange skin type, variations stucco type),

 

7. CTP base board,

 

8. PS base board,

 

9. CC Lids/cap plate

 

 

3. Brief Technique information:

 

Alloy: 5083, 5052, 5005, 6061, 6062, 1050, 1060, 1070, 1235, etc

 

Temper: O-H116, T2-T6.

 

Thickness: Light Gauge(0.15mm-2.0mm), Middle Gauge(2.0mm-6.0mm), Thick Plate(6.0mm-200mm)

 

Width: Max. 2400mm

 

Length: As required

 

Sheets Tensile strength and Elongation: offer by customer

 

4. Applications:

 

Aluminum sheet are widely used for aluminum and plastic composite board,aluminum and plastic pipe,and bottle/tank cap,as well as curtain wall board/aluminum curtain board,ceiling board/specialshaped ceiling board,aluminium sheets for cable channel,conmestic packging and electrical manufacture,etc.

 

•Building Applications - Pre-painted sheet, Anodised sheet, Roofing Coil, Patterned sheet ( 5 Bar Tread plate and Propeller Plate) 

 

•Road transportation - Pre-Painted Roofing and Caravan Coil, sheet and plate for the bull bar industry 

 

•Road signage - Mill Finish and Linished 1.60 and 2.00 5052 H38 grade aluminium from leading manufacturers of aluminium sheet for use in the road sign industry. ALSPEC also carries complementary extrusions to suit. 

 

•Marine - ALSPEC carries a wide range of sheet and coil for use in local marine markets. 

 

•General Fabrication - ALSPEC carries a variety of sizes, alloys and finishes to suit a wide range of end use applications. Examples include:

 

•Mill finish 5005, 5052, 5083

 

•Anodising quality mill finish from Europe 

 

•PE Coating available 50UM, 80UM, 100UM 

 

•Pre-painted aluminium coil

 

Our representation supports worldwide markets that may include:
• Architectural products • Marine • Transport • Sign manufacture • Roofing products • Special anodizing applications • General engineering and fabrication  • Others

 

5. Aluminium sheets and plates for its most common application:

 

Aluminum sheet(plate) for air-conditioner,plastic board etc

 

1)Alloy:1050 1060 1061 1070 1100 3003 3004 3105 5005 5052 5083 5754 5A03 5A06 6063 8011 

 

2)Temper:O-H112,,F,T 

 

3)Thickness: A:cold rolling: 0.09--8.0mm 

 

B:hot rolling: 0.2--500mm 

 

4)Width: A:cold rolling: 200--1900mm 

 

B:hot rolling: 200--2300mm 

 

5)Length: A:cold rolling: 500--10000mm 

 

B:hot rolling: 500--10000mm

 

6. Aluminium sheets other factor introduction:

 

Aluminium sheet is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminium foils and beverage cans are alloys of 92% to 99% aluminium. The main alloying agents are copper, zinc, magnesium, manganese, and silicon (e.g., duralumin) and the levels of these other metals are in the range of a few percent by weight.

Manufacturing hammered aluminum sheet 

Products Show