solar powered air purifying respirator s auto darkening welding helmet with respirator s used for anti dust gas (1093339724)

Share on (1093339724):

Price:$250.00 - $280.00


Product Overview



POWERED AIR PURIFYING  RESPIRATOR provides the water proof main body design which can endure the strict cleaning and sterilizing. Three filters slots design determines that the respirator will be suitable for different working environments as you can choose to use one or two or three of the slots at the same time. The respirator is light in weight, comfortable in wearing, human body engineering design which can uniformly distribute the weight, easy in operation with remarkable positive pressure, service life, airtight and filtrating functions, 0.3μm filtrating precision and 99.97% filtrating efficiency. Its air flow is adjustable, clockwise turning up the air flow, otherwise turning down. The respirator allows people to work easily and pleasantly in conditions with exceed concentrations and/or hazard compound. The POWERED AIR PURIFYING RESPIRATOR is the best choice to provide protection from occupation diseases.



disinfected mask.jpg




Welding helmet with PAPR



1, Carton package

A, 1pcs in 1 carton 57.5x23x27cm Net weight:2.2kg Gross weight: 4.5kg                    

B,  6pcs in 1 big carton 59x48x55cm Net weight:12.5kg Gross weight: 25kg

 2, Suitcase package

A, 1pcs in 1 one case 57x23x27cm

B,  4pcs in 1big carton 59x48x55cm

carton package.jpg

How to use

1.1 connecting

1.Connect belt and engine as picture 2. Fix them at waist. According to personal condition,adjust the tightness. Connect helmet and engine by the air supply hose as picture 1. Adjust head frame inside helmet to appropriate position. Turn on the power of engine and adjust the airflow to a comfortable level(0-5), then you can start to work. When the battery power is low and the electric fan cannot work, power adapter is needed be inserted. During charging, light is red. And when charge is over, light is blue. The whole charging period is about 10 hours. It can be used directly with power adapter inserted.

1.2 Notice

1.2.1 This product should be used after the battery is fully charged.Non-short-circuit the battery. Battery must be kept away from fire.KCM-DZ-S engine can work 6-8 hours when fully charged so if the working time is longer than 6 hours, spare battery is needed. It can also work with power adapter inserted and in such circumstance, the working time is unlimited.

1.2.2 Put on the helmet, press the bottom in the back on the head frame and whirl to left/right at the same time. According to personal condition, adjust the tightness until the helmet is firm on head. Turn on the power of engine, then walk into polishing place.

1.2.3 Air flat tube is upon the head frame. This tube supply fresh air into helmet. While the fresh air flow into the helmet, mask and face will be separated by the airflow. Excess air will be blowed out of the helmet between the black retardant lining and head, which can keep the dust and smoke outside away.

1.2.4 After welding work, helmet is needed be checked. If there is any spot, please wipe it with soft cloth or wash it with neutral detergent. Don’t clean it with rough/tough cloth or something like that so that it won’t scratch the glass and surface of helmet.

1.3 Change filter and seals

1.3.1 To the high effective particulate filter: engine works well but airflow is inadequate, maybe the filter is filled with dust. In this case, you can remove the filter and flap it till the dust is divisible, then wipe with soft cloth. Or directly wash the black coarse sponge on the filter, when the sponge is completely dry, then put it back. Do not use the sponge with water remain on it. Filter should be changed when used repeatedly. Filter is consumables and its work life is about 20 days while the specific work life is decided by working condition.

1.3.2 When replace the filter, you should try not to allow the dust to fall into the cavity of engine. If there is any dust fall into cavity, you should clean it immediately or it will impact purifying effect. It is important that to make sure the front cover of engine is stuck firmly with the new filter.

1.3.3 The engine box and filter are cleaned or are new. If there is any dust or peculiar smell coming from breath tube, please check the seals of engine or filter. If the seals has any broken, please replace promptly.

1.3.4 Filter needed be kept away from water. If filter becomes damp, please replace promptly.

1.4 Charge

The hole beside the charging speed control board is power supporting and charging hole. Charging is with DC 12V power adapter. You can use this product with charging and there is a intelligent protection circuit in the engine so it will not overcharge.

Main component and parameter

2.1 Helmet


Thickness is 3mm.It can bear 4 bar wallop.There is cingulate inside and connect to the retardant lining cloth.

2.1.1 Head frame

Tightness adjustable; wear comfortably

2.1.3 Lining cloth

Adopt black retardant fabric; wear comfortably;retardant;easily removable and washable;prevent polishing/cutting slag and sparks into the helmet.

2.2 Air supply hose


Stand high temperature; keep soft in low temperature; long working life.

2.3 Air supply engine

Weight:1074g(with battery);803g(without battery);One year warranty.

With a stainless steel strainer on the surface of engine to isolate welding slag and sparks.

2.3.1 Filter



Covered with coarse filter sponge.The filter is consumable item without warranty.

2.3.2 Electric blower

The airflow has 5 levels and it can be adjusted by bottom.Three years warranty.

2.3.3 Battery

The engine is powered by a 12V,4.8AH lithium battery.Continuous power supply time is about 8 hours.Charge-discharge life is about 500 times.

2.4 Power adapter

Input voltage is 36V-220V AC. Output voltage is 12V 4A DC. In-line power use or use with battery after full charge.  

2.5 Belt

Snap connection; Wear comfortably; Tightness adjustable.

Engine(not man-made damage) has ONE year warranty.

The equipment has one year warranty.Consumable item is not covered under warranty.

Contact Information

Contact person: Bruce Lee 

Tel: +086-15854821343 

Wechat: 907806168

Skype: bruce.lee5858

Taian Newlife Mechanical and Electronic Technology Co.,Ltd



High quality Auto Darkening Welding Helmet- - Leading manufacturer from China 

 TH1B1 auto darkening welding mask4_conew5.jpgTH1B2 auto darkening welding mask2_conew7.jpg

Product Description

Auto Darkening Welding Helmet TH-2B2 has been designed specially for

welders with varying job requirements and a need for an extensive range

of individual adjustment options.

The features include protective levels from DIN 3 to DIN 13 and various

additional options that provide the welder with absolute freedom and

unrestricted comfort.

The enlarged field of view (+ 33%) and true color filter allows the welder

a brilliant, detailed view of the welding object.


  Cartridge Details

· Button to select shade level ranges: DIN 3-9 and DIN 9-13.

· Variable shade level control between DIN 3-9 or DIN 9-13.

· Grinding mode to prevent automatic darkening when grinding and brazing.

· Sensitivity control to adjust the sensors ability to detect the welding arc.

· Selectable opening delay to provide protection from the afterglow and to adapt to personal needs.

· Batteries CR2032, 2 pcs (back side)

· The delay function allows the user to set the dark-to-light switching time (1-20000s).

· A selection of welding filters with superior optical performance for continuous viewing comfort.

· Arc detection down to 1 amp TIG.

· Ultraviolet (UV) and infrared (IR) protection at all times, in all states.

· Increased coverage for ear and side of head.


 Application Ranges

  • Electrode Welding (Stick Welding, SMAW)


  • GMAW High melting rate process

  • Flux Cored Wire Welding

  • TIG welding (GTAW)

  • Plasma Arc Welding

  • Micro Plasma Arc Welding

  • Plasmacutting

  • Oxy-Gas Welding

  • Grinding

  • Prohibited for laser welding!


CE Approvals and European Standards


In Europe, all personal protective equipment must be CE marked and in

compliance with the PPE Directive 89/686/EEC before they can be placed

on the market. The PPE must also be in compliance with applicable, national,

harmonized standards that ensure that the basic safety requirements in the

PPE Directive are met.


Our Welding Helmets are produced strictly according to Personal Protective

Equipment Directive 89/686/EEC, passed the standards EN 175:1997 test

report and EN 379:2003+A1:2009 test report.


-EN 175:1997 Personal protection - Equipment for eyes and face protection

during welding and allied processes.

-EN 379:2003+A1:2009 Personal eye-protection - Automatic welding filters.
For the provisions of internal control measures to ensure the conformity of series

production of the machines, Taian Newlife has built an internal quality control

system in accordance with the international standard of ISO-9001.




We accept sample order by Paypal
Do you have questions about this product? Ask a question(skype: bruce.lee5858)








Auto Darkening Welding Helmet Mask


                      Technical Data




Filter Size


View Areas 


UR/IR Protection


Light Shade Number


Dark Shade Range


Shade Adjustment


Sensitivity Adjustment


Switching Time (light - dark)


Recovery Time


Power ON/OFF


Power Supply


Operating Temperature

-5c to +55c (23f to +131f )

Storing Temperature

-20c to +70c (-4f to +158f )

Net Weight




We accept sample order by Paypal        
Do you have questions about this product? Ask a question(skype: bruce.lee5858)





My products are different from others, we pay our attention to the quality not the costs.If you want to buy high quality welding helmets, please choose us


Weclome your inquiry!!!   skype: bruce.lee5858 

If we can't cooperate, it's not your fault, if cooperate only one time, it's my fault!!!


0.0239 s.