Ultra flexible, 2 component, polymer modified, waterproofing cement based slurry | AQUAMAT SUPERELASTIC
- Category: >>>
- Supplier: ISOMAT S.A.
Share on (11000002553057):
Product Overview
Description
Product Description
AQUAMAT-SUPERELASTIC is a two-component, ultra-flexible waterproofing slurry offering the following advantages:
• Easy application with a brush, roller or airless spray in one layer up to 2 mm thickness.
• Total waterproofing against positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also withstand negative
• pressure.
• Crack-bridging ability even at low temperatures.
• Resistance to UV radiation.
• After hardening, it forms a seamless and jointless membrane.
• Excellent adhesion to surfaces such as concrete, plaster, bricks, etc.
• High vapor permeability and resistance to frost.
• Resistance to aging caused by temperature fluctuations.
• Resistance to chemicals, such as de-icing salts, sulfates, chlorides, etc.
• Protection of concrete from carbonation.
• No corrosive effect on the reinforcing steel in concrete.
• Suitable for green roofs, flower beds, etc., as it is root-resistant.
Certified according to ΕΝ 14891 and classified as liquid-applied, two-component, water-impermeable product CM Ο2P for
waterproofing under tiles, in external installations (walls and floors) and swimming pools. Test report No.: 19/1906-460, APPLUS
Laboratories. CE marked.
waterproofing under tiles, in external installations (walls and floors) and swimming pools. Test report No.: 19/1906-460, APPLUS
Laboratories. CE marked.
Also certified as material suitable for contact with potable water, according to the requirements of RD140/2003 (Spanish Regulation that establishes sanitary criteria for water intended for human consumption, in accordance with 80/778/EEC). Water tanks must be thoroughly washed prior to filling with potable water.
Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. CE marked. Certificate No.: 2032-CPR-10.11. AQUAMAT-SUPERELASTIC has been successfully tested by a third-party laboratory for resistance to root penetration, according to CEN/TS 14416:2014.
Fields of Application
It is used for waterproofing surfaces made of concrete, plaster, bricks, cement blocks, terrazzo, gypsum boards, wood, metal, etc. Ideal in cases where ultra flexibility and excellent adhesion of the waterproofing layer are required.
Suitable for waterproofing substrates that are subject to expansion-contraction or vibration and show or are expected to show hairline cracks, such as flat roofs, balconies, above ground water tanks, swimming pools, inverted roofs, etc.
It can also be used for waterproofing basements, internally or externally, against moisture or water under pressure.
It is used for waterproofing elements subject to salt water or de-icing salts and under ceramic tiles, in bathrooms, kitchens, balconies, flat roofs, swimming pools, etc.
Tiles should be fixed with a high-performance, polymer-modified tile adhesive, such as ISOMAT AK-22, ISOMAT AK-23 XXL, ISOMAT AK-25, ISOMAT AK-ELASTIC, ISOMAT AK-MEGARAPID.
Color
White.
Consumption
Depending on the water load, minimum consumption and relevant thickness should be as follows:
Water load | Minimum consumption | Minimum thickness |
Moisture | 2.0 kg/m2 | Approx. 1.3 mm |
Water without pressure | 3.0 kg/m2 | Approx. 1.85 mm |
Water under pressure | 3.5-4.0 kg/m2 | Approx. 2.5 mm |
Packaging
30 kg packaging (20 kg cementitious powder + 10 kg emulsion resin).
Shelf life – Storage
Component A:
12 months from production date if stored in original, unopened packaging in frost-free and dry conditions.
Component B:
12 months from production date if stored in original, unopened packaging at temperatures between +5°C and +35°C. Protect from direct sunlight and frost.
Certificates
CE | EN 1504-2 C
CE | ΕΝ 14891 CM Ο2P
Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. CE marked. Certificate No.: 2032-CPR-10.11.
Also, certified according to ΕΝ 14891 and classified as liquid-applied, two-component, water-impermeable product CM Ο2P for waterproofing under tiles, in external installations (walls and floors) and swimming pools. Test report No.: 19/1906-460, APPLUS Laboratories. CE marked.
P-1201/107/17
Certified as root-resistant according to UNE CEN/TS 14416 EX: 2014
Suitable for drinking water
Very low VOC emissions, the strictest quality label for low emission products.
Also, certified as material suitable for contact with potable water, according to the requirements of RD140/2003 (Spanish Regulation that establishes sanitary criteria for water intended for human consumption, in accordance with 80/778/EEC). Water tanks must be thoroughly washed prior to filling with potable water.
About Us
ISOMAT is a Greek multinational Group specializing in the development and manufacture of building chemicals, mortars and paints. For over 40 years, ISOMAT has been making a history of quality, reliability, deep expertise and continuous business growth. It has three production units; one in the parent company in Greece and two in its subsidiaries in Romania and Serbia. In addition, it has 5 commercial subsidiaries in Germany, Russia, Turkey, Bulgaria, and Slovenia and exports to over 80 countries worldwide.
ISOMAT has developed integrated solutions for both large and small construction projects through its wide portfolio of more than 350 high-quality products falling into the following 8 product categories:
1. Waterproofing
2. External Thermal Insulation
3. Paints & Surface Protection
4. Tile & Natural Stone Installation
5. Concrete Admixtures & Repair Products
6. Masonry Construction & Repair
7. Industrial floorings
8. Microcement Coatings & Decorative Floorings
Committed to continuously developing new, pioneering, user-and environment-friendly products, ISOMAT owns a fully organized R&D department consisting of 7 chemistry R&D labs and 3 Quality Control labs (in Greece and its 2 subsidiaries in Serbia and Romania) staffed by highly qualified experts. Their mission is to continuously optimize existing products and develop a number of new, innovative, high-performing products every year in keeping pace with the ever-increasing market needs and technological advancements in the construction industry.
1. Waterproofing
2. External Thermal Insulation
3. Paints & Surface Protection
4. Tile & Natural Stone Installation
5. Concrete Admixtures & Repair Products
6. Masonry Construction & Repair
7. Industrial floorings
8. Microcement Coatings & Decorative Floorings
Committed to continuously developing new, pioneering, user-and environment-friendly products, ISOMAT owns a fully organized R&D department consisting of 7 chemistry R&D labs and 3 Quality Control labs (in Greece and its 2 subsidiaries in Serbia and Romania) staffed by highly qualified experts. Their mission is to continuously optimize existing products and develop a number of new, innovative, high-performing products every year in keeping pace with the ever-increasing market needs and technological advancements in the construction industry.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
