The M/NSK Hunter 150 /Ranger 200
motorcycles are designed for use in forestry applications. They have an increased cross-country ability due to the increased suspension travel, and the layout allows the installation of the rear tire with a wider tread. The feature of these models motorcycles - numerous attachments: larger rear rack, side and front racks, protective bars, headlight guards, hand guards, as well as, front disc brake, which, in turn, adds to the overall safety of the rider and his passengers. The wheels are spiked, which increases the strength and resistance to external shock, they cope better on uneven and hard surfaces than cast wheels. Large 16.8-liter fuel tank. Ample capacity, low maintenance, and serviceability are the qualities that characterize these models.
Hunter 150/Ranger 200 advantages
1. Available in black or khaki, the M/NSK Hunter 150/Ranger 200 has a classic, functional design. It is equipped with high and low beam headlights, reflectors and a large brake light.
2. Rear suspension includes 2 reliable shock absorbers. The steering wheel of usual section with a low rise is protected by a special metal arch from damages if the motorcycle falls down. Also on the handlebar is a power steering weight, which allows you to start the bike without getting up from the seat.
3. This is a real workhorse with a good margin of safety for the hard day-to-day work. The wheels are 18 inches in diameter. Tires with large spikes allow you to overcome obstacles and ride confidently off-road.
4. M/NSK Hunter 150 /Ranger 200 are equipped with carburetors and single-cylinder four-stroke engines 150/200 cm³, with a long service life and quiet operation due to the balancer shaft. The mechanical transmission has 5 gears. Electric starter and kick starter can be used to start the engine.
5. Large metal tank makes it possible to ride long distances without worrying about the presence of gas stations. Motorcycle is equipped with a speedometer with an electronic gear shift sensor, tachometer. Front and rear brakes are drum, easy to adjust, if necessary, they can be tightened even in the field.
6. These models as multifunctional transformers - if necessary, you can easily increase the payload area. On the handlebars there is a trunk with a cargo holder. There is also a large trunk in the rear of the bikes, and above the footrests are built in special increase the area for the transportation of goods.