Share on:
We are well know globally for the supply of Heavy Crude Oil.Our experince
permits us to supply our product within the USA and to your closest port at any angle of the world.
We can meet your demand based on our specification bellow. But if our specification
does not meet your demand, kindly notify by providing your specification so we can
notify you if we can meet your precise specification. We an meet your demand as soon as
you want it
M e t hod Units | T e s t | Result | U n it |
ASTM D5002 | Density and Relative Density of Crude Oils Average API Gravity |
29.7 (29.7) (Min) |
API |
ASTM D1298-99 | Density @15 Deg C | 0.87 (0.8775) (Max) | Kg/t |
ASTM D97 | Pour Point of Petroleum Products Pour Point Pour Point | < -33 (-36) (BELOW ZERO) < -27.4 (-32.8) (BELOW ZERO) |
°C °F |
ASTM D93-IP34 | Pensky-Martens Closed Cup Flash Point Corrected Flash Point |
117 (137) (MIN) |
°F |
ASTM D4294 | Sulfur Content in Petroleum Products by EDXRF Sulfur Content |
0.38 (0.358) (MAX) |
Wt% |
ASTM D445 | Kinematic/Dynamic Viscosity Kinematic Viscosity @ 122°F / 50°C |
17.83 (18.12) (MAX) |
Mm2/s |
ASTM D6304 | Water Content by Coulometric Karl Fisher Titration Water Content |
0.20 (0.7) (MAX) |
Wt% |
ASTM D482 | Ash from Petroleum Products Average Ash |
0.279 (1.007) (MAX) |
Wt% |
ASTM D2161 | Conversion of Kinematic Viscosity To SUS/SFS 1Saybolt furoi viscosity 122°F |
10.9SFS |
(MAX) |
ASTM D5184 | Aluminum and Silicon in Fuel Oils by ICP-AES or AAS Aluminum Content Silicon Content |
102 (MAX) 93 (MAX) |
Mg/kg Mg/kg |
ASTM D95 | Water by Distillation, Vol% | 0.70 (MAX) | Vol% |
ASTM D4530.06 | Carbon Residue | 1.11 (MAX) | Wt% |
| |||
M e t hod T e s t Re s ult Units | |||
IP 143 Asphlteness Heptane lnsolubles | |||
| Asphaltene Content | 0.08 | Wt% |
IP 501 Determination of AL,Si,V,Ni,Fe,Na,Ca,Zn,P in Fuel Oil-ICPES | |||
| Aluminium Silicon Sodium Vanadium Calcium Zinc Phosphorus Iron | 372 187 117 1 779 298 4176 545 |