Smart Strip Lights Controller RGB RF 216W/432W 12v/24v 18A with White Remote Control for LED Strip Touch Interface

Touch RGB controller 216W/432W is a convenient and modern way to control an RGB LED strip. It has a wide range of functions in its arsenal: turning on/off, changing colors, modes and brightness. However, its main advantage is that it transmits a signal via a radio channel (RF). This means that the remote control will be able to control the tape even through obstacles, cornices, partitions, etc.

In the center of the remote control there is a circular touch ring, with which you can select any color from the RGB spectrum. The remote control runs on 3xAAA batteries.

Modern design along with wide functionality make RF touch remote controls one of the most popular choices for controlling RGB LED strip.

Connection

• Unscrew the + and - screw terminals on the side of the controller where it says “Input”, insert the wires into them, and tighten.



• Connect the wires to the + and - respectively of the 12 volt / 24 volt power supply.



• Connect the RGB tape on the opposite side, where the terminals are (R, G, B, +), as well as the inscription “Output”.



• When connecting the tape, make sure that the color of the wire matches the socket into which you insert it: R - red, G - green, B - blue, + - black.