Factory direct sale 1.0mm 80mm POM PP PA PTFE plastic ball

Product Name

Plastic ball(POM,PP,PA,PTFE,ABS)

Specification

Φ3.0mm—Φ25.4mm

Grade

G0-G3

Feature

Plastic balls with high hardness and rigidity, excellent abrasion resistance and lubricity, which is high density, crystallinity of linear polymers, and resistance to repeated impact, small changes in intensity

Applications

Mainly used in automotive, sensor, BB shells, valves, pumps, sanitary ware, electronics, bearings, electrical appliances, and other industries

Material

DELRIN Balls (ACETAL RESIN-POM)

Size

Φ2.381mm—Φ38.1mm

Grade

G0-G3 (±0.01-0.05mm)

Density

Around: 1.4 g/cm3

Feature

Performance: it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption

Applications

POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus.

Material

Polypropylene Balls(PP)

Size

Φ2.381mm—Φ38.1mm

Grade

G0-G3 (±0.01-0.05mm)

Density

Around: 0.85g/cm3

Feature

Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator.

It has a high resistance to chemical substances, such as acid, alkali, alcohol, many inorganic substances, salt solutions, solvents, gasoline, water, oil, grease, cleaning agents, fruit juices, milk and the like, but not resistant to aromatic carbon hydrogen compounds and chlorate.......

Applications

PP ball is mainly used for transfusion, level calibration indicator.

Material

 Nylon Balls (Zytel®, Polymide—PA66)

Size

Φ2.381mm—Φ38.1mm

Grade

G0-G3 (±0.01-0.05mm)

Density

Around: 1.1g/cm3

Feature

The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products.

Applications

Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects

Material

Teflon Balls-PTFE

Size

Φ2.381mm—Φ38.1mm

Grade

G0-G3 (±0.01-0.05mm)

Feature

Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of
-180 ° C to 350 ° C. PTFE (Teflon ®), ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material,

Applications

Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.