8086 MICROPROCESSOR TRAINER KIT / 8086 TRAINER KIT / Didactic Trainer Equipment

Product Overview

Description

M86-01 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop  software/hardware for any industrial process & control.  This Kit consists of  power-full Monitor EPROM, RAM, I/O Lines, Timer/Counter, Serial, Seven Segment Display and Keyboard for Man to Machine Interface.

Features

·         16K Bytes of EPROM with 16K bytes of Battery Backup RAM.

·         72 I/O Lines, Three Channel Timer/Counter, PC Serial Interface using USART, Interrupt Controller.

·         Seven Segment Display with 28 Keys Hex Keypad.

·         Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/ Register.

·         Uploading & Downloading to and from PC in Windows98/XP/NT.

·         In-Built Power Supply.

Specifications

·         8086/8088 CPU operating at 2.5/5MHz

·         8086 Processor can be replaced by 8088 Processor

·         On-board sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor

·         16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB.

·         16K bytes of powerful monitor EPROM using two nos. of 27512

·         72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series.

·         16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector.

·         RS-232C interface using 8251 brought out at 9 Pins D-Type Connector.

·         On-board Interrupt controller using 8259 brought out at 20 Pins FRC Connector.

·         28 keys hexadecimal keyboard and eight seven segment display using 8279

·         Two modes of operation:

o  Keyboard Mode

o  Serial Mode

·         Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode.

·         Facility for Downloading/Uploading files from/to PC.

·         All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.

·         All ICS are mounted on IC Sockets.

·         Bare board Tested Glass Epoxy SMOBC PCB is used.

·         In-Built Power Supply of +5V/2A, ±12V/250mA

·         Attractive ABS Plastic enclosures.

·         User's Manual with sample programs.