13 мм * 100 мм упаковщик для Ремонта Трещин бетона/эпоксидная смола инъекционный упаковщик

Product Overview

Description

 

 

 

 

Injection method statement

1.Identify the crack.

2.Drill the hole 5 to 10 cm away from the crack at 45 toward the crack.

3.Clean the hole properly.

4.Insert the packer.

5.Fix and tight the packer.

6.Connect the pump to the packer and start injecting.

7.After injection material is totally dry remove the packer.

 

Product Description

 

High pressure injection packer is the use of loop pressure fastening principle. The head is provided with a one-way valve, can prevent the slurry at high pressure into the pour spout.

 

Specification

 

 

 

 

 

 

Application Places

Subway, tunnels, culverts, sewage treatment pond, basements, underground garage, underground passage, roof concrete slab cracks, wall pipe, wall, the water leakage cracks in concrete, concrete structure, beam, column, slab cracks etc with high pressure grouting injecting epoxy resin.

 

 

Specification

 

Injection packer	diameter *length
A8	13mm*75mm
A10	13mm*90mm
A15	13mm*130mm
B8	10mm*80mm
B10	10mm*100mm

 

Characteristics

 

1. The injection packer is with strict quality control.

 

2. It is widely used in building construction, concrete crack and water leaking stop.

 

3. Long size injection packer is used on lose structure; short size on compact structure.

 

4. It suits for polyurethane resin and epoxy resin.

 

Injection Method Statement

 

1. Identify the crack.

 

2. Drill the holes 5 to 10 cm away from the crack at 45 toward the crack.

 

3. Clean the hole properly.

 

4. Insert the packer.

 

5. Fix and tight the packer.

 

6. Connect the pump to the packer and start injecting.

7. After injection material is totally dry remove the packer.

 

 

If you need these machine too,you can click on the picture and place the order together.

 

Contact:Michelle Tung 

Wechat.:+86 18680531939