Transparent Water Repellent Impregnating and Priming Construction Building Material

Product Overview

Description

SILOX is a solvent and silane-siloxane based, single component, surface impregnating and priming material which provides an invisible waterproof barrier in capillaries it is applied.

• Application surface must definitely has a sharp downstream slope.


• On high absorbent surfaces such as concrete, mineral surface, gas concrete, brick, roofing tiles etc.; mineral based natural and artificial stones; mineral based painted surfaces; monuments, statues. For restoration purposes.


• It is not recommended under high pressure water, on glazed surfaces, in underground conditions with high hydrostatic pressure or on painted surfaces.

• An invisible material which does not form any film on the surface.


• It is the ideal material for the surfaces where the appearance must not change.


• Has vapor permeability; provides breathability for the surface.


• Has water repellent effect.


• It will be not tacky after curing.


• It does not form a layer on the surface.


• It protects the surface against mold, meldew, fungus.


• It is resistant to alkaline environment.


• It provides heat economy.


• It has high UV resistance.

Content Color Density Application Temperature Drying Time Full curing Mechanical strength HS Code

Solvent and silane-siloxane Transparent 0,79 g/cm3 +5°C to +35°C   3 hours 3 days 3208.90.91.00.23

Preparation of Substrate

The application surface must be clean and dry and free from grease, rust, dirt, mold, etc. Cracks and loose parts must be repaired. The surface to be treated for water insulation must be inclined downstream. Building elements such as window frames or panels must be protected during application.

Application Method

SILOX surface impregnating material should be applied by using brush, roller or spray gun. The application method is saturating the surface wet on wet at least two layers. Topcoats must be applied on the SILOX after 24 hours.

0,200 – 0,600 kg/m² for each layer depending on absorbency of the surface.

3,5 kg metal can

15 kg metal can

12 months in original, unopened package.

Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.

Clean tools and equipment with stain remover immediately after use. Dried material can only be removed mechanically.