Waterproofing Admixture for Improved Adherence

Product Overview

Description

LATEX is an acrylic based admixture that used plasters and screed to improve adherence and impermeability.

•           In interior and exterior applications.


•           In mortars, plasters and screed.


•           In interior and exterior plasters of water tanks, pools and reinforced concrete silo.


•           In mortars of stone, brick and floor tile for improving freeze-thaw stability.


•           As adherence admixture in mortars prepared for repairs.

•            Excellent adhesion performance.


•            Excellent water impermeability.


•            Improves durability without any cracks.


•            High freeze-thaw stability.


•            High elasticity.


•            High abrasion resistance.


•            Improves water and chemical resistance.

Content Color Solid Content Density Application Temperature Service Temperature Drying Time Pedestrian Traffic Final Strength HS Code

Modified Acrylic Dispersion White 42 % 1,08 kg/lt +5°C to +35°C -20°C to +80°C   24 hours 28 days 3824.40.00.00.00

 

Preparation of Substrate

The application surface must be durable, dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Water leak on the surface must be drained or sealed by a suitable stopper. Application surface must be damp 12 hours before the application, but there must not be any free water left on the surface.

 

Application Method

In plaster mortar; 1 m³ washed river sand and 350 kg cement is mixed together. 120 kg water and 5 kg LATEX is mixed into another cup. Liquid mixture is poured into the powder mixture and stirred well until homogenous mixture is obtain. Mixture should be applied by trowel.

Making of grout; 1 m³ washed river sand and 350 kg cement is mixed together. 110 kg water and 4 kg LATEX is mixed into another cup. Liquid mixture is poured into the powder mixture and stirred well until homogenous mixture is obtain. Mixture is applied on primed surface.

In coating mortar; 1 m³ aggregate, 250 kg cement and 3 kg LATEX is mixed and added water until getting thick mixture. Mixture and floor laying is applied together.

In shake mortar; 1 m³ washed river sand, 350 kg cement and 10 kg LATEX is mixed and added water until getting thick mixture. Mixture is applied with strewing equipment. 24 hours later surface is ready for pedestrian traffic. Full curing is done after 28 days.

5 kg plastic drum

20 kg plastic drum

12 months in original, unopened package.

Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.

 

Clean tools and equipment with water immediately after use. Dried material can only be removed mechanically.