CE Certified Arthroscopy Arthroscopic Ablator electrosurgical pencil
- Category: >>>
- Supplier: Baisheng Medical Co. Ltd.
Share on (1281761306):
Product Overview
Description
;Disposable Electrosurgical Pencil
----------Arthroscopic Ablator
CE Mark
Range of Using:
Match with Electrosurgical Generator(Unit), Radio Frequency Generator(Unit) and other High Frequency Equipment.
Type:
D: Disposable
These devices are single use supplied sterile. Check plug matching on generator base and connect. Press CUT/yellow button for cutting and COAG/blue button for coagulation. Maximum voltage is not be exceed 90KV peak
Product feature:
1.Intended for ablation,tissue modification and coagulation of soft tissue in arthroscopic procedures such as hip, shoulder, ankle, wrist, elbow and knee.
2.Extending shaft enables good visualization and easy insertion through subcutaneous tissue,and well insulated coating guarantee its safety and reliability.
3.Irrigation/suction solution is available with a cannula and an adjustable flow control valve.
4.Tips in different shapes and angles fit in particular arthroscopic procedure.
5.Compatible with most electrosurgical generators.
| 00201-45° | 45° angle flat brush tip |
| 00201S-45° | 45° angle flat brush tip,with suction |
| 00201-90° | 90° angle flat brush tip |
| 00201S-90° | 90° angle flat brush tip,with suction |
| 00201A-45° | 45° angle round brush tip |
| 00201AS-45° | 45° angle round brush tip,with suction |
| 00201A-90° | 90° angle round brush tip |
| 00201AS-90° | 90° angle round brush tip,with suction |
| 00202S-90° | 90° angle bloom tip,with suction |
| 00202AS-90° | 90° angle lotus tip ,with suction |
Warning:
These devices should never be used when:
There is visible evidence of damage to the exterior of the device such as cracked or damaged plastic or connector damage.
These devices fail the inspection described herein.
In the presence of flammble gases, flammable prep solutions or drapes. Oxidizing. Gases such as Nitrous Oxide (N2O),or in oxygen-riched environments.
Do not used monopolar electrosurgery on small appendages, as in circumcision or finger surgery.
Company Information
FAQ
Q: Can you a factory or a trading company?
A: We are a Chinese Medical instruments manufacturer. All the products are made of our workers
Q: Can you accept the OEM ?
A: Yes! We offer”OBS” brand to you. But if you want we can do the OEM service for you.
Q: Which areas are you products usually sold to?
A: Our products usually exported to North America, South America, The Middle East, South-east Asia, Europe and so on.
Q: What’s your deliver time?
A: If we have the stock, it will be delivered with 3 days. If it is very large, it will be delivered within 8-20 days.
Q: What’s the address of your company?
A: Our address is
Add:No.11, Fusheng Road, Xinhui District, Jiangmen, Guangdong, China.
Tel.:+86-750-6628113 ext 821;
Fax.:+86-750-6616122;
Cell: +86-18675001475;
P.C.:529100;
www.obs-medical.com
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
