china manufacturer sheep repellent with youtube youporn iptv

Product Overview

Description

sheep repellent

 china manufacturer sheep repellent with youtube youporn iptv

1.This repeller is designed for permanent service allowing you to install it once and let it work!

2. It is weather-proof allowing it to work all year-round and in virtually all weather conditions.

3.It uses solar power to recharge the batteries so its always working.

4.The Passive InfraRed sensor (PIR) detects motion and triggers the ultrasonic speaker emitting a tone that people cannot hear but chases away common outdoor pests like dogs, cats, deer, raccoons, mice, skunks, squirrels and more.

5.This solar animal repeller is a safe and humane way to keep unwanted animals away!

   Technical data

Theory	Ultrasonic(18-25KHZ)
Repel type	Cat,dog,fox,deer,rat,squirrels
Color	Deep green or OEM
power	4 x "AA" Ni-CD rechargeable batteries
Solar panel	Amorphous
Coverage area	30 feet @ 110° = 2,425 square feet
Usage	Garden/lawn
item size	37*14*9.5cm
QTY/CTN	24pcs
Unit box	15.6x14.5x7.6cm
Unit carton	48*31.5*31cm
N.W./G.W	8KGS/9KGS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  Product detail

 sheep repellent

  To Assemble and Install

1. Unpack the unit completely and confirm that all parts are present. SEE FIGURES 1-4 above.
2. Connect the repeller head, pole sections, connecting part and ground stake. SEE FIGURES 1-4 above.

3. Turn power switch to "ON" position. SEE FIGURE 2.
4. The PIR repeller is designed to be left ON continuously. It uses four "AA" size Ni-CD rechargeable batteries.
5. Once turned ON, the LED light and ultrasonic signal will activate for 15 seconds. Following this activation, the unit will move to stand-by mode.
6. The unit is now ready for installation. The location should allow adequate sunlight to keep the batteries fully charged. Be sure that the area needing protection is within the effective range of the repeller. SEE FIGURE 2.
7. For best results, keep the repeller head roughly 9-10 inches above ground.
8. Take care not to stress or break the repeller when installing in hard ground. It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
9. When the PIR sensor detects motion, the LED light will flash for 3 seconds and the ultrasonic signal will run for 15 seconds. Following this, the repeller will return to stand-by mode.

sheep repellent

  WARNING!

Always check for underground utilities, cables or wires before digging or installing!

Failure to check could result in personal injury, property damage or even death.

  CAUTION!

1.Allow the Animal Repeller to operate continuously for best results.

2.Do not immerse repeller in water.

3.Do not cover-up the PIR sensor.

4.To clean the repeller, use a damp-soft cloth and mild soap with water.

5.Do not use harsh chemicals or abrasive cleaning agents that may damage the repeller.

  Product showing

sheep repellent

sheep repellent

   Global Network

sheep repellentsheep repellent 

sheep repellentsheep repellentsheep repellentsheep repellentsheep repellentsheep repellentvvvsheep repellentsheep repellentsheep repellentsheep repellentsheep repellentsheep repellent