High performance silicone thermal graphite powder spraying carbon electrical conductive ink electro paint coating for nsulator

Product Overview

Description

Conductive coating
Model No.: PD-0403-4AB | PD-0403AB | PD-0403-AB | PD-0403-6HD-AB | PD-0403-6AB...
Method of application:
•   Mix AB agent thoroughly until completely combined. •   Using the mixer fully stirring for 5 to 10 minutes. •   Before coating, it will be filtered once through a 200-300 holes filter screen. •   The mixing ink of effective operating time is 6 hours. •   When the ink is used, room temperature should be controlled at 22C approximately, and ensure constant temperature and humidity.
Vulcanization conditions:
•   Vertical oven: 180C, 20 minutes •   LR conveyer belt: 220C, 7 minutes
Tips:
•   Because of the character of volatile solvent, when using the coating ink, please pay attention to ventilation, and keep away from flame and heat. •   Avoid long time contacting with skin. After the vapor is inhaled or contact with the skin, wash immediately with plenty of soap-suds. •   Storage period: 6 moths at normal temperature without any catalysts being added.
Application:
It is a kind of double fluid heating curing coating conductive inks, with stable resistance value, excellent adhesion, good abrasion resistance, bright appearance, high tearing strength, etc, especially used in silicone rubber cable accessories, such as composite insulator, lightning arrester, and so on.
>>> Typical Properties Data
Model No.	Resistance value KΩ	Ratio A:B	Specific Gravity 25°C	Punctur  voltage  KV/CM²	Application
PD-0403-4AB	1~3	100:1	1.01	16	Small value resistance, moderate black
PD-0403AB	5±1	1:1	1.33	20	Double components coating
PD-0403-5AB	4±1	1:1	133	20	High temperature and double components coating
PD-0403-6HD-AB	4±1	100:1	1.15	16	Low temperature coating
PD-0403-6AB	4±1	1:1	1.33	20	High temperature and double components coating
PD-0403-6-1AB	4±1	1:1	1.33	20	High temperature and double components coating
PD-0403D-AB	over 20~25	100:1	1.12	24	More bright bigger valure resistance after coating
PD-0403H-AB	4±1	100:1	1.08	16	Normal
PD-0403SD-AB	4±1	100:2	1.25	20	Low temperature coating
PD-0403SW-AB	4±1	100:1.5	1.12	16	High temperature and double components coating
PD-0403G	4±1	100:2	1.25	35	High temperature and double components coating
PD-0403P-AB	4±1	100:2	1.25	35	High temperature and double components coating

 

 

>>> Application

 

 

 

 

>>> Certificates

 

 

>>> Why choose KANGLIBANG silicone adhesive

 

 

 

Customer Feedback:

 

Our factory supplies conductive coating with high quality. I’ve been very happy with your best service, let’s continue discussions and work on more. 

 

Our enterprise mission is to strive to be a chinese national brand, to make the whole worle more harmonious, to make our life more colorful.  

 

Our Core Value

Integrity,Responsibility,

Passion,Win-win

Value ,Execution