12 V (AC / DC) 200 W PTC Heaters Thermostatic Heating element Multipurpose Multifunction Air Heater Insulation heater
- Category: >>>
- Supplier: Passion Electrical Appliance Ningbo Co. Ltd.
Share on (1600082886820):
Product Overview
Description
Product Description
Product Name | Air Heater Element |
Tube Material | SUS304 |
Power | 200W |
Voltage | 12V |
Hi-pot test | 1800V/S min cold condition |
Insulation | 500MΩ |
PTC heater insulation
Main purpose: heater / humidifier / auto / air conditioning / incubator / subway and other common electrical / Universal Heater
Instruction manual:
1. the power line does not distinguish between positive and negative, you can freely link power 12V.
2. when the heater is dry, low thermal efficiency, it is recommended to use with the fan.
3. can be placed under a wet environment, but can not be placed in water.
4. for the first time, will produce a small amount of smoke, is a normal phenomenon, it will disappear within a short time.
5. built-in 230 degrees Celsius heater chip, when dry the surface temperature of about 200 degrees Celsius, the fan blowing, the
surface temperature of about 120 degrees Celsius.
6. both ends of the product wearing bracket (PA66 high temperature nylon)
7. Test: Ambient temperature 24 degrees Celsius, the wind speed: 3.3 m / s, distance from the outlet 10 cm. Hot air temperature of
about 50-60 degrees Celsius.
8. under normal circumstances, PTC heater in a very short time after the start, it will have an impact power, which is about 1.5
to 3 times the rated power, but will rapidly decline, which is normal. Please buyers understand!
9. Life: about: 3--5 years.
We are committed: to provide you with quality products, if you are not satisfied with our products and service, please write to us
in time, we will give you the best solution! I wish you a happy shopping!
Instruction manual:
1. the power line does not distinguish between positive and negative, you can freely link power 12V.
2. when the heater is dry, low thermal efficiency, it is recommended to use with the fan.
3. can be placed under a wet environment, but can not be placed in water.
4. for the first time, will produce a small amount of smoke, is a normal phenomenon, it will disappear within a short time.
5. built-in 230 degrees Celsius heater chip, when dry the surface temperature of about 200 degrees Celsius, the fan blowing, the
surface temperature of about 120 degrees Celsius.
6. both ends of the product wearing bracket (PA66 high temperature nylon)
7. Test: Ambient temperature 24 degrees Celsius, the wind speed: 3.3 m / s, distance from the outlet 10 cm. Hot air temperature of
about 50-60 degrees Celsius.
8. under normal circumstances, PTC heater in a very short time after the start, it will have an impact power, which is about 1.5
to 3 times the rated power, but will rapidly decline, which is normal. Please buyers understand!
9. Life: about: 3--5 years.
We are committed: to provide you with quality products, if you are not satisfied with our products and service, please write to us
in time, we will give you the best solution! I wish you a happy shopping!
Why Choose Us
Contact Our Team
Our sales and engineering services are available at your convenience, whenever you need us. Whether it’s 11:00 pm on a Saturday night, or 7:00 am on Monday morning, it makes no difference to us. We’re always available to assist you with your order or answer any questions you may have about our manufacturing services.
Let Us Handle Everything
Prefer to call us? Talk to a Passionea Expert at +86-181-5820-2116
or email:sandry@passionea.com
Production Process
Packing&Shipping
Certifications
Company Introduction
Passionea focuses on the design, development, and manufacture of electric heating elements, thermostats as well as other related products.
Since the beginning of 1998, thanks to the accumulation of more than 20 years of industry experience in the field, Passionea has grown from a factory that produces electric heaters & electric heating accessories to a professional manufacturer with its own design team and development team. Our products have obtained CE and RoHS certification and the company has been ISO9001 certified.
We provide high value-added, high-quality products while ensuring the reliable delivery time for customers. Our products are dedicated to meeting the stringent requirements of high efficiency, safety, and energy-saving in modern life.
Passionea has achieved multiple technological breakthroughs through strong innovation capabilities. Passionea uses its own testing laboratory and a number of advanced testing equipment to conduct product testing to make sure of the high quality and pass rate of products. Under the strict management system, accurate delivery time is assured every time.
We strictly select our suppliers and strictly control the quality of each raw material and accessories including magnesium oxide, resistors, pipes and so on.
Since the beginning of 1998, thanks to the accumulation of more than 20 years of industry experience in the field, Passionea has grown from a factory that produces electric heaters & electric heating accessories to a professional manufacturer with its own design team and development team. Our products have obtained CE and RoHS certification and the company has been ISO9001 certified.
We provide high value-added, high-quality products while ensuring the reliable delivery time for customers. Our products are dedicated to meeting the stringent requirements of high efficiency, safety, and energy-saving in modern life.
Passionea has achieved multiple technological breakthroughs through strong innovation capabilities. Passionea uses its own testing laboratory and a number of advanced testing equipment to conduct product testing to make sure of the high quality and pass rate of products. Under the strict management system, accurate delivery time is assured every time.
We strictly select our suppliers and strictly control the quality of each raw material and accessories including magnesium oxide, resistors, pipes and so on.
Our Services & Strength
We provide ODM and OEM services based on customer requirements and application scenarios, offering customers the most suitable
heat treatment solution with a sincere attitude and professional advice. Passionea has established long-term friendly cooperative
relations with domestic and foreign customers. Our customers are located in many countries and regions including the Americas,
Europe, Latin America, the Middle East, Asia and so on. We are looking forward to establishing more cooperation and providing more
help to customers all over the world.
heat treatment solution with a sincere attitude and professional advice. Passionea has established long-term friendly cooperative
relations with domestic and foreign customers. Our customers are located in many countries and regions including the Americas,
Europe, Latin America, the Middle East, Asia and so on. We are looking forward to establishing more cooperation and providing more
help to customers all over the world.
FAQ
Q: Are you a manufacturer or trading company?
Answer: We are a manufacturer of heating elements and thermostats.
Q: What is your MOQ?
Answer: Usually we accept 1,000 orders for each model. For conventional models, we also accept quantities below 1,000 pieces.
Q: What is your delivery time?
A: Our delivery time is 25-30 days after the deposit payment.(Customized Product)
Q: How long does it take to arrive?
Answer: About 7-30 days at sea and 5-7 days in the air.
Q: Can I get samples before ordering?
Answer: Yes. The sample fee and shipping fee should be paid by your side.
Q: Can I print my logo on the product?
Answer: Yes. We provide OEM & ODM services. We can print your own logo on the product.
Q: How to ensure quality?
Answer: For the certificate, we have ISO9001, CQC, CE, ROHS, BEAB. For practicality, we will conduct a 100% inspection during the
production process and before shipment.
Q: What if I have any bad goods in my order?
Answer: If the product is caused by us, we will be responsible for the product with quality problems.
Answer: We are a manufacturer of heating elements and thermostats.
Q: What is your MOQ?
Answer: Usually we accept 1,000 orders for each model. For conventional models, we also accept quantities below 1,000 pieces.
Q: What is your delivery time?
A: Our delivery time is 25-30 days after the deposit payment.(Customized Product)
Q: How long does it take to arrive?
Answer: About 7-30 days at sea and 5-7 days in the air.
Q: Can I get samples before ordering?
Answer: Yes. The sample fee and shipping fee should be paid by your side.
Q: Can I print my logo on the product?
Answer: Yes. We provide OEM & ODM services. We can print your own logo on the product.
Q: How to ensure quality?
Answer: For the certificate, we have ISO9001, CQC, CE, ROHS, BEAB. For practicality, we will conduct a 100% inspection during the
production process and before shipment.
Q: What if I have any bad goods in my order?
Answer: If the product is caused by us, we will be responsible for the product with quality problems.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
