PIGEON breast milk heat resistant glass baby milk feeding bottle 240 ml

product introduction

Trade name: breast milk solid feeling nursing bottle, heat-resistant glass 240, green

Internal capacity 240ml

The product description is just like a mother's breast, using a non deformable nipple type of nursing bottle (made of glass). The soft, thumping stretch is very similar to the action of the tongue when drinking breasts. In addition, because of the soft calves, babies can open their mouths, and breast-feeding can be carried out smoothly. Mom, it's easy for Dad to mix milk and wash because it's big mouth. Made of heat-resistant glass, easy to decontaminate and keep clean.

Specification functional cap: Polypropylene

Nipple: synthetic rubber (silicone rubber)

Bottle: boric acid glass

Nipple size: three scissors M

Color: light green

Pay attention to safety

cleaning pay attention to sanitation.

always clean and disinfect before first use.

After use, please soak it in warm water immediately and clean it with "baby girl's milk bottle and vegetable cleaning" and other methods.

Please use nylon brush to clean the glass bottle.

use both hands to gently wash the vent valve, vent hole and suction hole. The valve will avoid leakage during strong cleaning or pulling.

In order to protect the vent valve, a white powder food additive was applied. Please wash before use.

the front of the nipple is very sensitive. When cleaning with a cleaning brush, please press the front of the nipple with your finger belly, and clean at the same time.

when cleaning the nursing bottle, please do not use the scraper with abrasive, metal deflection or cleaner which may produce defects. It may lead to fracture.

disinfect ····. Please use after disinfecting.

"Boil and disinfect"

pour a large amount of water into a large pot, put the cleaned nipple, bottle, bottle cap and food into it, and boil it with fire. Sterilization time is 3-5 minutes after boiling.

If not fully poured into hot water to boil, it may cause deformation of the bottom of the pot.

If you cook too much, you will fry the product as soon as possible.

"Water disinfection"

Please use "baby's milk bottle" and other special disinfectants for nipple. Please follow the instruction manual of disinfectant for details.

when the solution is sterilized, the color of the printing may become light.

"Microwave sterilization"

Make sure to use special tools. Do not put the bottle and parts directly into the microwave oven for sterilization.

Please follow the use method of the appliance for disinfection.

Please use the microwave oven according to the operating instructions.

When using in the hospital, please fully consider the type of microorganism, the environment used by the majority of non-specific infants, etc., and determine the disinfection time.

assembly method

Before assembly, please confirm whether the vent valve is open.

1. Crush the seat plate of the nipple and take it up.

2. Insert the nipple plate all the way from the bottle cap.

3. Insert the entire seat plate into the inside of the cap with the thumbs of both hands.

4. This is done.

Please turn over to confirm whether the seat plate is skewed.

5. Put the nipple and cap on the bottle.

Please tighten it to prevent the cap from falling off.

for the detailed milk mixing method, please refer to the milk powder expression.

1. When mixing milk, please make sure to boil it first, and then use hot water cooled to over 70 ℃.

After boiling, leave for more than 30 minutes. Never use water below 70 ℃.

In winter, the nursing bottle will become cold. If you add about 70 degrees of milk regulating water, it is recommended to heat it and then pour out the hot water, and then inject more than 70 degrees of milk regulating water.

When the bottle is cold, if the hot water just opened is poured into it quickly, it may break, please note.

2. Please follow the milk mixing method of each milk powder manufacturer.

3. Put the cap with nipple in the bottle and tighten it gently.

Do not set food, use clean towel or grab pot to hold milk bottle.

Towa Co.,Ltd. is an international trading experience that has been developed up to now, and in cooperation with a reliable international partner who earns seriously, is lively, flexible, and swiftly from the position and the point of view of the customer as the person in charge of the overseas trade of Japan, and the international trade and import and export business of the small business and the private enterprise in Japan I will support your duties at all.