DIY Laser 4050 Engraver Mini CNC Laser Engraving Machine With 0.5W 2.5W 3.5W 5.5W 15W 30w Lazer Cube for wood and plastic
- Category: Laser Engraving Machines >>>
- Supplier: Henan Lunyee Industrial Automation Equipment Co. Limited
Share on (1600101385490):
Product Overview
Description
Product Pictures
DIY Laser 4050 Engraver Mini CNC Laser Engraving Machine With 0.5W -40W Lazer Cube for wood and plastic
Parameters
Construction | Aluminum |
Working area | 400mm*500mm |
Connect | USB |
Laser | 0.5w 2.5w 3.5w 5.5w 15w 30w 40w |
Output | DC 12V 5A |
Support system | Win7, win8, win10 |
Can engrave Metal | 30w can engrave stainless steel, iron and colorized anodised aluminum |
Non -metal | ceramics, stone, wood, bamboo, leather, plastic, etc. |
Matters need attention
* Please look for the official store, other similar products are imitations.
*Please wear the protective glass when you use the laser module.
*Do not touching the laser light directly in case that hurt the body and skin.
*Keep children and pets away from the laser module when it working.
*The Laser dot could not be adjusted, please make sure the distance between bottom of the laser module
Product Details
Laser and control board
The new control board
How to use fixed-focus laser :
Two Color lasers for your choice
Newly designed 40w laser
Better heat dissipation
Average optical power 15W
Product Effects
Your satisfaction is our relentless pursuit，start your DIY engraving adventure！
Company Information
FAQ
Q: Can it engrave/mark on gold or silver? Can it engrave/mark on all metal materials?
A: No, this machine can only mark on some stainless steel, iron and colorized anodised aluminum. It can not engrave/mark on gold or silver.
Q: Can it engrave any depth on metal?
A: No visible depth, it can only leave a marking.
Q: Can it engrave on carved surfaces(cylinder or alike)?
A: No, it works only on flat surface.
A: No, this machine can only mark on some stainless steel, iron and colorized anodised aluminum. It can not engrave/mark on gold or silver.
Q: Can it engrave any depth on metal?
A: No visible depth, it can only leave a marking.
Q: Can it cut wood?
A: It can cut normal wood of 3mm, Other wood material has not been tested yet.
A: It can cut normal wood of 3mm, Other wood material has not been tested yet.
Q: Can it engrave on carved surfaces(cylinder or alike)?
A: No, it works only on flat surface.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
