Сушильная машина для сушки древесины горячим воздухом, тепловой насос, сушилка для древесного шпона (1600110686529)

Share on:


Price:2 300,00 $
Price in USD:Details

Quantity:


Product Overview

Description



Product Overview


Wood Processing Machine -- Drying Machine & Packing Machine
Fresh wood contains a lot of moisture which will continue evaporating in a certain environment. If water evaporates naturally, wood will shrink, crack, bend, deform and even ferment, which will damage the quality of wood products. Therefore, wood has to be dried on a controllable basis before made into wood products. The correct drying process can overcome the defects mentioned above, and enhance its mechanical strength and processability. It is an important technology-based measure to make reasonable use of wood and to add its values and a e primary and necessary procedure to produce wood products.
Energy consumption of drying wood accounts for 40-70% of the total of producing the wood products. The drying process wastes heat too much with the energy consumption of 30%. The energy cost in the drying process occupies more than 50% of the total drying cost. As imbalance between supply and demand of energy is increasing and the environmental problem caused by the atmospheric greenhouse effect is more and more severer, the wooden industry pays greater attention to the energy-saving wood-drying process. In the past twenty years, many drying technologies have been developed. Among them, the heat pump drying process has posted a better performance in saving energy. MEIYA wood dryer has the capability of drying varieties of wood such as logs, rosewood and cabinet-wood, and really solves the problems customer are faced with in the drying process.

Factors influencing the wood drying
1. Wood temperature: Measure and control the dry-bulb temperature to adjust the working status of the heating system so as to control the temperature in the cabinet.
2. Wood humidity: Measure the difference between dry-bulb temperature and wet-bulb temperature to adjust the dehumidification amount and the working status of the spraying system to automatically control the humidity in the cabinet.
3. Moisture content of wood: Adopt the resistance-based moisture meter to prevent limitation and deviation arising from measurement and to provide effective technology-based guarantee for accurate performance of the moisture content baseline for wood.
How to dry wood with MEIYA dryer
1. The wood drying equipment which wants to dry wood on a controllable basis must have the three basic functions: heating, adjustment of humidity and ventilation. Heating speaks for itself. Adjustment of humidity is used to provide the high-humidity environment necessary for some phases to prevent wood from cracking and deforming. The ventilation device must ensure that the wet and hot air goes through the pile of wood evenly so as to make the water in the dried wood well-distributed.
2. In the early drying process, the performance coefficient (COP) of the heat pump unit is high due to high relative humidity of the wood to be dried. As the drying process goes on, the COP will decline due to decrease of the relative humidity, resulting in lower performance of the unite on a negative basis.
3. If the temperature is not high, for example, the low-temperature heat pump is below 54°C, moisture can’t be removed from the wood in case the moisture content is below 15%. Generally, it is necessary to raise the drying temperature to 71°C or above.
4. The drying cabinet shall be thermal-insulation and resistant to air loss. In terms of the thermal insulation, the cabinet structure shall have a small thermal capacity to reduce heat loss, which is equal to or less than the mechanical equivalent of heat. No humidifying equipment is installed in the heat pump drying cabinet. If the water vapor overflows, it is definite that the drying condition is hard to change. Therefore, the cabinet shall have good air impermeability.
5. Keep the air flow in the cabinet stable. It is the best if the air speed is 1m/s.


FEATURES AT A GLANCE


* Environmental protection
* Safety and Long Using Life
* Energy saving
* High efficiency
* Intelligence
* Low labor cost









PRODUCT SPECIFICATIONS


No
Model
Dryer size(mm)
Drying chamber size(mm)
1
MY-03RD
1650*856*1280
3200*2190*2200 or 3800*2190*2200
2
MY-05RD
1650*856*1280
3800*2190*2200
3
MY-06RD
1650*1056*1280
6150*2190*2200
4
MY-12RD
2089*1260*1580
6350*3230*2200
5
MY-15RD
2089*1260*1580
6350*4670*2200
6
Double MY-03RD
1650*856*1280
7050*2190*2200
7
Double MY-05RD
1650*856*1280
7050*2190*2200
8
Double MY-06RD
1650*1056*1280
10100*2190*2200
9
Double MY-12RD
2089*1260*1580
10750*3230*2200
10
Double MY-15RD
2089*1260*1580
12900*4670*2200


PRODUCT CONFIGURATION


Main heat pump dryer
Drying room panel
Trolleys and trays


SALES AND SERVICE NETWORK




Successful Project


Project in Costa Rica
Project in Ethiopia
Project in Thailand




SIMILAR PRODUCTS




FAQ


Q1. Does the MEIYA drying machine running by Gas or electricity or Diesel?
Answer: Electricity only
Q2. Could I put my LOGO on the Dryers?
Answer: Yes,we can provide OEM service.
Q3. What is the material of drying machine cover ?
Answer: we can do SS304# or printed steel, different material with different price.
Q4. What should I do if I am interested in your drying machine?
Answer: Thank you so much for your attention. Pls don't hesitate to contact us by mail or by phone, telling us which one model, how many sets, drying capacity, and other special requirements etc.
Q5. What are your main products of your company?
Answer: Heat pump dryers, and other food processing machine(washing machine, cutting machine and packing machine, etc.)
Q6. Could you give me your catalogue?
Answer: Yes, you can download it on our website or send us email, we will send you ASAP.



Please feel free to contact us to get more information.



1600110686529
0.0112 s.