Outdoor Garden Terrace Engineered Wooden Floor Tile WPC Wood Plastic Decking Flooring Composite decking
- Category: >>>
- Supplier: Huzhou Kelai New Material Technology Co. Ltd.
Share on (1600117669367):
Product Overview
Description
Product Description
Kelai traditional WPC decking is made of 60% wood fiber,30% HDPE and 10% Additives.
These are all materials are very friendly.And it is anti-slip,anti-uv, crack-resistant and anti-mite etc.However, the most important thing is that it doesn't need any maintenance.
Surface of composite decking:Both side are flat or embossing
These are all materials are very friendly.And it is anti-slip,anti-uv, crack-resistant and anti-mite etc.However, the most important thing is that it doesn't need any maintenance.
Surface of composite decking:Both side are flat or embossing
Name | Solid composite decking | |||
Model | KY140H20B | |||
Surface | Flat or wood grain | |||
Size | 140*20mm |
Length | 2.2m/2.9m/3m/customized | |||
Certificate | CE/TUV/Intertek/ISO9001 | |||
Application | Outdoor | |||
Delivery Time | 15-20 days after we received the deposit |
Colors
Storage and Maintenance
1.Pls don't arbitrarily stack when discharge WPC decking.
2.Because of the possibility of deformation , so Pls don't verticall discharge, and plslevel on the ground when storage WPC decking.
3.Place on the plane, should prevent the rain, pls use the protective material to cover.In order to get better supporting effect, pls support to the edge when transport WPC decking.
4.When put on the hard ground, there should have suitable material to underlay atthe bottom, pls pay attention to the cutting ends and don't have impact phenomenon.
5.Don't have a hammer and other hard things fall impact , all these may cause WPC products damaged.
6.When move WPC decking material, we should avoid mutual sliding friction. Move out from the whole stack , and should lift , then place.
7.When install WPC decking, Pls don't let tools, screws or tools equipment sliding on the decking surface.
8.Avoid WPC decking touch with the building waste.
9.After the scrape, WPC chip contain resin component , so we shouldn't treat it asburning garbage disposal, pls deliver the debris and other waste materials to factory for recycle, not only it can protect our earth, but it also realize WPC material recycling.
Application
Our Projects
Packing&Delivery
Company Profile
Kelai was created to bring you the best WPC(composite) products from China.Our Team of professionals have many years of experience in the export and domestic market. Kelai is selling our wpc(composite) decking to more than 30 countries around the world, like USA, Canada, Mexico etc.
Workshop
FAQ
Q: What is the species of wood fiber you use?
A: Eucalyptus, poplar and some mixed wood, which is color related.
Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic, Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina, Australia,etc.
Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not be obvious.
Q: How many production lines you have? What about the production capacity per month?
A: 14 extrusions lines. 30-35 containers per month.
Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.
HDPE: melting index, ash content, physical property test for finish product
End product: melting index, ash content, physical property test for finish product
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test
Q: What about delivery time for one container?
A: 15-20 days upon deposit payment well received.
Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.
Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it’s mainly about color difference, cause our raw material is recycled material, there is always
difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.
A: Eucalyptus, poplar and some mixed wood, which is color related.
Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic, Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina, Australia,etc.
Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not be obvious.
Q: How many production lines you have? What about the production capacity per month?
A: 14 extrusions lines. 30-35 containers per month.
Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.
HDPE: melting index, ash content, physical property test for finish product
End product: melting index, ash content, physical property test for finish product
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test
Q: What about delivery time for one container?
A: 15-20 days upon deposit payment well received.
Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.
Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it’s mainly about color difference, cause our raw material is recycled material, there is always
difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
