drop ship DMX colorful led strip DC5V 24V programmable SP107E blue tooth music controller
- Category: >>>
- Supplier: Shenzhen Kaixinliang Technical Co. Limited
Share on (1600145694471):
Product Overview
Description
DMX colorful led strip DC5V-24V programmable SP107E blue tooth music controller
Item No.: | led strip controller | ||||||
LED TYPE | led chip | ||||||
Available color | RGB | ||||||
IC Model | 5050 rgb led strip | ||||||
Controller name | TS-107E | ||||||
View angle | 120 degree | ||||||
LED QTY | 30 60 74 96 120 144leds/m | ||||||
POWER | 1W | ||||||
Voltage | DC5V-24V | ||||||
General color | white | ||||||
Controller type | led chip controller | ||||||
Installation | wiht 3M adhesive back ,easy for installation | ||||||
IP rate | IP20/IP65(Silicon tube )/IP67/IP68 | ||||||
Package | with anti-static bag | ||||||
Application | indoor /outdoor decorative lighting ,ceiling lighting ,sign lighting etc | ||||||
Detail use information:.
1)Addressable full color led strips
2)30 60 74 96 120 144pcs led per one meter
3) individually control ----------1 ic& 1ed chip
4)Standard Reel Length: 5meter/roll, also can be customized.5) Cutted: 3 integrated RGB LEDs per segment, can be cutted per 3LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.
6)Power supply: You must use a 12 DC power supply to power this strip, do not use higher than 12V or you can destroy the entire
strip
7)3PIN JST SM connector(non-waterproof)soldered in each end of strip,extra 2single wire for powering in input side
8)Customised length available
2)30 60 74 96 120 144pcs led per one meter
3) individually control ----------1 ic& 1ed chip
4)Standard Reel Length: 5meter/roll, also can be customized.5) Cutted: 3 integrated RGB LEDs per segment, can be cutted per 3LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.
6)Power supply: You must use a 12 DC power supply to power this strip, do not use higher than 12V or you can destroy the entire
strip
7)3PIN JST SM connector(non-waterproof)soldered in each end of strip,extra 2single wire for powering in input side
8)Customised length available
Connection:
SPI signal :LED strip+ LED power supply +led controller DMX control :LED strip + LED power supply+DMX controller +DMX decoder
LED controller :T-series SD card controller ,RF remote controller .DMX controller,Arduino.........(off line /PC online)
LED power supply :Meanwell power supply ,T- series ,A-series .... (waterproof /non-waterproof )
LED controller :T-series SD card controller ,RF remote controller .DMX controller,Arduino.........(off line /PC online)
LED power supply :Meanwell power supply ,T- series ,A-series .... (waterproof /non-waterproof )
We Recommend
New Arrivals
New products from manufacturers at wholesale prices