This is a set of 24/40 glassware for distillation in lab. With a 14/20 joint to accept thermometers calibrated for 75mm immersion.
The distributing adapter consists of a single 24/40 outer joint and three 24/40 inner joints to accept three 150mL Kjeldahl flask receivers.
The receivers are held in place with plastic clamps. Including:
1.Distillation head, short path with 24/40 joint, with a 14/20 outer joint to accept thermometers calibrated for 75 mm immersion.one piece design for easy set up.
with removable hose connector.
2.Distributing adapter, distillation receiver, with the24/40 outer and inner joints at 135 degree angle.
with removable hose connector
3.Kjeldahl flask receivers with24/40 joint 3 pcs
4.1000mL 3 neck flask, heavy wall design, with 24/40 joint, 1 pcs.
5.plastic joint clip, 24/40, for standard taper joint.(Pack of 10)
6.thermometer adapter, 24/40 joint. 1pcs
7.thermometer adapter, 14/20 joint. 1pcs
8.65mm Outer diameter Cold Trap,24/40.1pcs
9.250ml receiving flask,24/40.1pcs
10.Bleeding tube.2pcs.
11.Penny-Head Hollow Glass Stopper.1pcs
12.Yellow back Thermometer.1pcs
13.All of the stands in the picture
If you need any other size or other Ground joints,please contact with us
