Share on:
Lifterboy-vacuum suction is specially designed to solve the hand carry problem, for small load 10kg to 100kg transport.
Flexible solutions are available in almost every case...
Almost everything can be lifted
With custom-made tools we can solve your specific needs. Please contact us for more information
Main Features:
lLoad bearing up to 140KG!
lLifts porous and uneven surfaces!
lElectrical vacuum pump, works safer!
lEasy operation, one key start-up, one to release
lWork continuously for 24 hours!
Parameter
Battery Voltage | 14.8V Li-ion |
| |
Battery cell specification | 2.6Ah | ||
Rated power | 16W | ||
Dimensions | 300mm*180mm*110mm | ||
Net weight (with battery) | 1.5kgs(3.3lbs) | ||
Working temperature | 0°C-60°C(30°F-140°F) | ||
Working time (full charge) | 24hours | ||
Power supply
Charging Output Voltage | DC16.8V 15A |
Charging input Voltage | 100V-240VAC 50/60Hz 1.5A max |
Operating instruction
1. Connect the power plug of the battery charger to the power outlet
2. Connect the charger to the battery
When the battery is connected to the charger, it will start charging, and stop charging automatically when the battery is full.
Note: Turn off the battery when the battery is low to avoid damage to the suspended material
*Please note whether the charging voltage is consistent with the requirements of the charger
After placing the lifterboy on the surface of the target workpiece, the adsorption process can begin.
3. Press the green button and the it works for you at once!
When lifting smooth materials such as glass, ceramic tile and marble, once the seal is formed, there is no need to turn off the green power button. The vacuum pump will start when the pressure is insufficient and stop automatically when reaching the preset vacuum upper limit, so as to realize the purpose of power saving and effectively extend the working time. On a smooth and dense sheet, the time from stop to start is generally not less than 15 seconds
When lifting slightly porous materials such as wood, plasterboard, mixed soil or cardboard, ensure that the equipment motor is kept on during lifting. The vacuum pump may be frequently started when grabbing these workpieces to ensure internal pressure in the system
Note: When using on smooth and compact workpieces, if starting frequency occurs, please check for tight wear or leakage of other seals
4. When you are finished, press the purple button to break the seal and release the item
Note; When the power button is pressed and turned off for 15 seconds, the system will automatically cut off the battery power supply and the battery will enter the body sleep state. When the power switch is started again, the battery will automatically restore power supply
Porous marble
Texture/rough Ceramic tile
MDF Sheets