Share on:
1, Performance introduction
1. Design The car body is made of high-strength yacht FRP or sheet metal, with smooth lines, strong corrosion resistance, novel and beautiful appearance; the car body is fully enclosed, with strong rust resistance.During transportation, there is no garbage exposure, no scattering, no sewage leakage; there are small garbage feeding ports on both sides of the box to facilitate the release of scattered garbage; the rear end is equipped with connecting rod slider lifting and self-locking bucket pressing mechanism, and the 120 L and 240 l Standard garbage cans can be lifted and turned over automatically;;The 240l18-20 operates smoothly and has high degree of automation; the double ends of the box are equipped with double cylinder hydraulic compression mechanism, which can increase the amount of vehicle garbage loading and the number of garbage cans.
2. operating system Hydraulic dump truck garbage, reliable performance, improve the efficiency of operation; operating system optimization design, multi valve hydraulic control, high degree of automation, safe and reliable, convenient maintenance; vehicle control system using single-chip microcomputer control, resistance accelerator.With anti electromagnetic interference, anti runaway, start delay and reverse deceleration and other safety functions; using special chassis.The front and rear axles are of integrated axle structure, and the rear axle adopts full floating structure. The tire will not fall off after the axle shaft is damaged, and the safety factor is high.Vacuum tire with high load.Front and rear hydraulic brake, widened brake, with good stability and safety; this car has electric power steering system (EPS); 8 3. Steering precision is high and flexible, and the tire adopts layer radial high load vacuum tire, which has wear resistance and long service life.The scope of application is widely used in the collection and transfer of various kinds of barreled garbage in central urban area, residential quarters, hotels, canteens, hospitals, etc.
Technical parameters
No. |
entry name |
Unit |
||
1 |
Dimensions (L / w / h) |
Mm |
3880*1400*1890 |
|
2 |
Wheelbase |
Front track width |
Mm |
1200 |
Rear track width |
Mm |
1220 |
||
3 |
wheelbase |
Mm |
1900 |
|
4 |
Minimum ground clearance |
Mm |
140 |
|
5 |
Parking capacity |
% |
15 |
|
6 |
Maximum climbing gradient |
% |
15 |
|
7 |
Minimum turning radius |
M |
4.2 |
|
8 |
Tank capacity |
M3 |
3.6 |
|
9 |
maximum payload |
Kg |
1200 |
|
10 |
curb weight |
Kg |
1200 |
|
11 |
Number of passengers |
person |
2 |
|
12 |
Top speed |
Km/h |
24 |
|
13 |
No load driving range |
Km |
120 |
|
14 |
Minimum braking distance (v = 20km / h) |
M |
≤4 |
|
15 |
Motor power |
v/kw |
72/5.5 |
|
16 |
Hydraulic motor |
v/kw |
72/1.5 |
|
17 |
Battery pack |
v/AH |
72/200 |
|
18 |
Box turning angle |
degree |
40 |
|
19 |
Charger |
V/A |
72/25 |
|
20 |
Electronic control |
V/A |
72/400 |
|
21 |
Outside noise |
DB |
≤68 |
|
22 |
Dumping height |
Mm |
1400 |
Hydraulic lifting part
No. |
entry name |
Company |
parameter |
1 |
Case cylinder |
Mm |
Φ 70/35-370(2pcs) |
2 |
Barrel turning cylinder |
Mm |
Φ 40/20-230(1pcs) |
3 |
Lifting cylinder of bucket hanging device |
Mm |
Φ 50/30-350(2pcs) |
4 |
Barrel hanging device overturning oil cylinder |
Mm |
Φ 50/30-350 |