Auto Headlight Removed Cold Glue Separate Liquid Disassembly tools

Product Overview

Description

High quality Headlight cold glue separate liquid for Car lamp separate

 

 

This product is non - corrosive to headlamp housing, lamp shade, lamp surface and electroplate.

Do not fill the headlamp gap in advance to avoid putting smoke in the oven!

1. Put wood or wood in the oven

2. Put the headlights into the oven at 120-150 degrees for 5-10 minutes. The temperature can be low for a longer time.

3. After the high temperature of the headlamp comes out of the box, glue it in a circle with a needle tube, and then the tool (a word batch or cold glue knife) is pried open along the liquid along the edge.

 

Advantages:

1. Simple operation: no impurities, no pigment

2. Fast separation: the latest upgrade product is fast, with high efficiency of 800g

3. No damage to headlamp: this product is non-corrosive to headlamp housing, lamp cover, lamp surface and electroplate.

4. Very practical: easy to fix the headlamp repair

 

Note:

If the temperature is not enough, please wipe clean the cold adhesive before, and then enter the cold adhesive into the second box. Usually it can be done at one time. The workers in our store have not needed to enter the second box.

 

Related products:

Name	Function
Headlamp restoration tool	Repair Headlight, make it new.
Windshield repair tool	Repair windshield crack
Nano ceramics coating	Protect Car paint
Discharge Tester	Test car discharge
Cold gel separating liquid	Separate Car headlights lampshade

 

    Headlight repair tool                          Windshield repair tool                    Nano ceramics coating

Open lamp steps:

If the separation liquid is injected into the headlamp slit in advance, it will cause smoke in the oven !

 

1. High-temperature baking lamp The headlight enters the oven at 120-150°. The time is 5-10 minutes. The temperature is lower, the time should be longer.

2. Injecting the separation liquid. After the high-temperature lamp is out of the oven.

 

3. Use the tool to disassemble: Then use the tool (cold glue knife) to open along the edge of the liquid, and when it is stuck, add some liquid.

 

4. Separation completed: less than 5 minutes, the headlights have been separated

 

 

Exibihition: