Dental Medical Equipment LED Curing Light Cure Lamp for Dentist Light density 2700mw Silver Color JAS 2001B

Product Overview

Description

LED Curing Light Cure Lamp Light density 2700mw Silver Color JAS-2001B

 

Operation instructions:

1) Charge : put the curing light into the charger socket,the yellow light is on.when it is done the blue light is on . it take about 4-6hours .remove the adapter from the power supply after charging.

2) Operation details :

press the power button,it is on .press the power button over 2 seconds ,it is off. When it is on, you can set the TIME (from 2-6 seconds ),then press the power button ,it is working;press the power button again ,it stops.

It will turn off automatically without any operation in a few minutes.

 

Parameters:

Input voltage : 100-240V ,50/60HZ

Charger Socket : DC5V

Battery: 3500MAH

Wavelength : 400nm-490nm

Power: 12W

Light density :2700mw/cm

 

Precautions:

1) Please change a new lamp guide if it is broken.

2) Disinfection: put the lamp guide to 75% alcohol for a few minutes.

3) Remove adapter from the power supply after charge.

4) Do not touch the battery electrodes by any metal objects, otherwise the battery will be damaged by the short-circuit.

5) It must be charged if it buzzs 5 times or the light will flick, 2. Structure otherwise the battery will be damaged because of the low power.

6)When you switch on the light and it switch off automatically, it only can be used after 1 min due to the overheat protection system.

 

Packing List:

1. LED Curing Light :1pc

2. Lamp Guide :1pc

3. Battery :1pc

4. Charger Socket :1pc

5. Adapter :1pc

6. Operation Manual :1pc