1.8mm Pre applied HDPE Self adhesive Waterproof Membrane
- Category: >>>
- Supplier: Shandong Shouguang Ruihua Non-Woven Fabrics Co. Ltd.
Share on (1600185274707):
Product Overview
Description
Product Description
Self adhesive polymer (non asphaltic) waterproof material, waterproof material is designed for building waterproof laying site developed by the polymer sheet, polymer membrane, self adhesive film, anti sticking layer, is non asphaltic base polymer predeveloped for fusion and concrete structure Pu waterproofing membrane.Under the action of pressure, the polymer self - adhesive film and the raw cement paste in the concrete do not start to creep and permeate to the anti - sticking layer to form an effective inter - adhesion and huge intermolecular force. After the concrete is solidified, the space between the polymer pre - installed waterproof roll and the main structure of the concrete is sealed permanently to the maximum extent, and the water channeling passage is completely eliminated.
Advantages
1. pre bonding
2. bonding reliable, easy to overhaul
3. the base level requirements are low, saving time limit
4. safety and environmental protection
5. excellent physical properties
6. optimal performance price ratio
Waterproof basement, subway, tunnel, water pool, inclined roof and flat roof and other parts, especially suitable for the waterproof engineering special environment, high water requirements; green planting roof; to prevent the leakage of underground gas, methane and other gases.
Specification
GB/T23457-2009 | |||
tensile property | pull N/50mm ≥ | 500 | |
Elongation at maximum tensile force% ≥ | — | ||
tear strength N ≥ | 400 | ||
Heat resistance | 70℃，2h No displacement, flow, drop | ||
Bending at low temperature ℃ | -25，No crack | ||
Anti channeling property | 0.6Mpa,Non channeling water | ||
Peel strength of post cast concrete N/mm ≥ | No processing | 2.0 | |
Thermal aging | 1.5 | ||
Peel strength of post pouring concrete with water immersion N/mm ≥ | 1.5 | 1.5 | |
Thermal aging 70℃，168h | Tension retention rate% ≥ | 1.5 | |
Elongation retention ≥ | 90 | ||
Bending at low temperature | 80 | ||
thermal stability | Dimensional change % ≤ | 2.0 | |
Packing & Delivery
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
