Home
Categories
Counters
Rs485 Output Pulse Production Encoder Digital Length Mechanical Counter Meter

Rs485 Output Pulse Production Encoder Digital Length Mechanical Counter Meter

Category: Counters >>>
Supplier: Toky,Electrical,Co.,Ltd.

Price:

Price in USD:Details

Quantity:

Product Overview

Description

Rs485 Output Pulse Production Encoder Digital Length Mechanical Counter Meter

Product Description

Model	Panel Size(mm)	Output Mode	Output	Display	Batch output	Communication	Code
CI80-RC60	80H×160W	Relay output	2 loops	6 digits	1 loop relay	No	B0380CI01
CI80-RC68	80H×160W					RS485	B0510CI01
CI8-RC60	48H×96W					No	B0380CI01
CI8-RC68	48H×96W					RS485	B0510CI01
CI7-RC60	72H×72W					No	B0380CI01
CI7-RC68	72H×72W					RS485	B0510CI01
CI4-RC60	48H×48W				No	No	B0380CI01
CI4-RC68	48H×48W				No	RS485	B0510CI01
CI8-RC80	48H×96W			8 digits	1 loop relay	No	B0510CI01
CI8-RC88	48H×96W					RS485	B0620CI01
CI7-RC80	72H×72W					No	B0510CI01
CI7-RC88	72H×72W					RS485	B0620CI01
CI80-RC60W	80H×160W	Relay output	2 loops	6 digits	1 loop relay	No	B0425CI01
CI80-RC68W	80H×160W					RS485	B0550CI01
CI8-RC60W	48H×96W					No	B0425CI01
CI8-RC68W	48H×96W					RS485	B0550CI01
CI7-RC60W	72H×72W					No	B0425CI01
CI7-RC68W	72H×72W					RS485	B0550CI01
CI4-RC60W	48H×48W				No	No	B0425CI01
CI4-RC68W	48H×48W				No	RS485	B0550CI01

Display	Display digits	Dual-line,6 digits,high light LED
Display	Display Range	-19999~999999
Input Signal	Signal Type	Square wave, sine wave, passive contact
	Input Impedance	Voltage input impedance is 5.4KΩ, Non-voltage input: short circuit impedance is max.1KΩ
	Signal Level	High Level:5-30VDC Low Level:0-2VDC
Input Signal	Max Frequency	1Hz,30Hz,1KHz,5KHz,10KHz selectable
	Edge Trigger	NPN falling edge,PNP rising edge
	Counting Accuracy	±1 pulse (more or less)
	Ratio Coefficient	0.00001~9.99999
Relay	Load Capacity	>100,000 times (NO:250VAC 3A resistive load NC:250VAC 2A resistive load)
	NO/NC guide	Refer to the connections
	Mechanical Life	>10,000,000 times
Input mode	UP/DOWN counting	U UP counting/D DOWN counting
	UP/DOWN counting control	UD-A UP/DOWN-A,UD-B UP/DOWN-B
	Phase Difference Counting	Rotary Encoder Input
Output	Output Mode	12 kinds, F,N,C,R, etc.
Output	Delay Time	0.01~499.99s
Auxiliary power supply	Supply Voltage	12VDC±10%
Auxiliary power supply	Capacity	<100mA
Temp.	Woking Temp.	-10~50 (Unfrozen)
	Storage Temp.	-25~65 (Unfrozen)
	Environment RH	35-85%RH
Communication	Comm. Protocol	ModBUS RTU
	Baud Rate	4.8KBPS 9.6KBPS
	Address Range	1-247
	Comm. Delay	No
Function	Power-Fail Memory	YES/NO
Function	Reset Pause Lock	Optional
Power supply & consumption		100~240V AC/DC <5W
Protection Class	Panel	IP 54
Protection Class	Housing	—
Mechanical requirements	Screw torque	0.74n.m~0.9n.m
	Installation size	Refer to the Dimensions
	Installation Mode	Panel mounting
Transpor- tation requirements	Vibration, Stacking	Amplitude:0.75mm Frequency:10~55Hz 1h for each X,Y,Z directions
Min Pulse Width	Reset	1,20ms optional
Min Pulse Width	Pause	1,20ms optional
Output	Passive contactor output	NPN open collector output (to be ordered)
Withstand Voltage	Dielectric Strength	2000V AC 50/60Hz 1 min
Insulation	Insulation Resistance	Min. 100MΩ (at500VDC)
EMC Anti-interference capability	Static	3 class
	Group of Pulses	4 class each mode±4000VP-P
	Lightning surge	3 class wire to wire±2000V
	Frequency Drop	3 class