2 Long time electroplating makes the plating layer more denser, the life time is longer than other tips
3 Short lead time for standard robot tips
4 The cost is much lower than original tips
5 Custom made available
6 Offer sample for testing
Packaging & Shipping
We can custom-made packaging!!!
Company Information
JNL has been specializing in soldering iron tip design and manufacturing for over 20 years, offering soldering tips to fit all of the most popular stations like Hakko, Weller, Pace,Apollo,JBC,QUICK,GOOT,UNIX & more! Long Life: Using a high-quality JNL soldering iron replacement tip increases solder speeds and decreases the total cost of manufacture. Higher temperatures and high tin content solders, common in lead-free solder processes, place additional strain on soldering iron tips. The long life of a JNL solder iron tip reduces tip changes, decreasing the total number of tips used and decreasing production time. Rapid Heat Recovery: JNL soldering tips are constructed from highly conductive premium grade copper to transmit heat to the work more quickly than other brands. This quick heat recovery enables more joints to be soldered per minute, thus reducing manufacturing time and costs. Tip Shapes & Sizes for Every Application JNL soldering tips are available in a wide variety of geometries including pointed / conical, blade/knife, chisel/screwdriver, and bevel. This allows you to solder fine contact areas, reach isolated areas on dense board designs, solder large pad areas, drag solder, or quickly remove solder with desoldering braid.
Tip Cleaning Notes:
* If the sponge cleaner is utilized, air-blow cleaning is normally not required. Some applications require air-blow & sponge tip cleaning (depending upon tip type) Standard cleaning duration is 0.5 second The iron tip does not need to be extended if not required The air-blow cup is not included with the standard Luna system
* If the tip is not “wetting” with solder (oxidation)
Remove pre-solder on tip completely. Remove oxidation by sand paper after cooling down the iron tip to room temperature. Turn on the power and apply solder on the iron tip during rising the temperature (manually). The tip will wet with solder by the above process.
