Aquarium Filter Media Ceramic Bio Media Blocks for Sump Tank Pond Fish Tank Media Bacteria House
- Category: >>>
- Supplier: Tongxiang Small Boss Special Plastic Products Co. Ltd.
Share on (1600214139260):
Product Overview
Description
Product introduction
After years of research and development and rich experience in polyethylene extrusion, small boss company developed the structured filter media Bio-Block. Bio-Block has been widely used in small sewage treatment projects in Europe, involving domestic sewage, industrial wastewater and aquaculture wastewater.
Specifications
Item Name | Description |
Material: HDPE Specifications：50*50*50CM (Customized) Packing Number：10*10 or customized Life-span ：15years Efficient surface area:350m²/m³ Diameter of pipes:50mm Free Sample: Yes Custom Parameters: No problem Packing: Stacked in containers Certificate：ROHS etc. Features: Light weight,Non-toxic,Pollution-free,Environment-friendly products Business Type: Factory Industry Experience: 28 years |
The structured filter media Bio Block is extruded from high-density polyethylene (HDPE) and welded to form a three-dimensional grid processing unit. The unique tube structure on its surface provides a special culture medium for microorganisms. The surface of the Bio Block is relatively rough, which enhances the ability of bacteria in wastewater to grow on the carrier. These strains can widely treat and degrade organic impurities in wastewater. The surface of Bio Block is used as the culture medium of special strains, and its treatment ability depends on its specific surface area. The larger the specific surface area, the more bacterial population and the better treatment capacity.
In biological wastewater treatment, it has unique flexibility, which can improve the capacity of treatment flow change and load.About 70% carbon dioxide can be removed and PH balance can be maintained by trickle filtration. The dissolved oxygen can be greatly increased to 5mg / L by water fall. It can also be used as solid bed packing instead of brush packing to culture biofilm and remove nitrite effectively.In practical engineering application, the structured filter media Bio Block has modular design, easy installation, no support, andcan be used in any pool type; high strength self-supporting system, lightweight and deformation free; mesh porous structure, to ensure full gas-liquid exchange, enhance dissolved oxygen content; self-cleaning, biofilm does not block. It is a new direction of packing selection.
Specific surface area for biological activity
When bacteria (biological film or biofilm) grow on a level surface, the specific surface area will remain constant even with the establishment of a thicker biofilm. Bio-block, however, is designed as a helical structure, based on oval threads with a defined diameter. If these threads become thicker due to growth in the thickness of the biofilm, the specific biologically active surface increases correspondingly.
General requirements for biological filter media in order to achieve optimal treatment results:
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
1. The filter media should have a relatively rough surface in order to enhance rapid establishment of a biologically active surface (biofilm).
2. The filter media must have a structure that makes back wash and cleaning operations on site possible. Canals have to be vertical and through the entire media column.
3. The filter media must have a structure that ensures optimal oxygen transfer to the bio-film i.e. it must have sufficiently high porosity.
4. The filter media must never clog and it must have self-cleaning properties. The structure must allow shed biofilm fragments to pass unhindered throughout the filter.
5. The filter media modules should be constructed with circular or oval threads. Bacterial growth on a circular or oval surface increases the diameter, thus increasing the specific biologically active surface area.
(Please note! This is in opposition to media with flat surfaces on which the specific biologically active surface area is
constant).
6. The filter media has to be biologically and chemically non-degradable.
7. The filter media must be self-supporting and mechanically strong. It must be able to carry overlying material and personnel should be able to walk freely and perform service tasks without deformation of the media.
8. The filter media must be UV stable and it must tolerate potential variations in temperature.
9. The filter media should be made from an environmentally compatible material (i.e. no PVC compounds or glue).
10. The filter media must be modular and easy to handle. This will ease installation and potential temporary removal in order to perform service tasks below the filter.
11. The filter media
2. The filter media must have a structure that makes back wash and cleaning operations on site possible. Canals have to be vertical and through the entire media column.
3. The filter media must have a structure that ensures optimal oxygen transfer to the bio-film i.e. it must have sufficiently high porosity.
4. The filter media must never clog and it must have self-cleaning properties. The structure must allow shed biofilm fragments to pass unhindered throughout the filter.
5. The filter media modules should be constructed with circular or oval threads. Bacterial growth on a circular or oval surface increases the diameter, thus increasing the specific biologically active surface area.
(Please note! This is in opposition to media with flat surfaces on which the specific biologically active surface area is
constant).
6. The filter media has to be biologically and chemically non-degradable.
7. The filter media must be self-supporting and mechanically strong. It must be able to carry overlying material and personnel should be able to walk freely and perform service tasks without deformation of the media.
8. The filter media must be UV stable and it must tolerate potential variations in temperature.
9. The filter media should be made from an environmentally compatible material (i.e. no PVC compounds or glue).
10. The filter media must be modular and easy to handle. This will ease installation and potential temporary removal in order to perform service tasks below the filter.
11. The filter media
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
