Cheap Custom Widely Used In Machinery And Equipment Resin Pool Metal Epoxy Putty

Product Overview

Description

Products Details

	Products Information
	Color	Black + White
	Packing	57gm blister card
	HS Code	3506912000
	Product Size	18*9.3*3.5cm
	Cover Included	Bonding metal, glass, ceramic, wood, plastics, tile, fiberglass, concrete and stone etc.
	Quality Insurance	24 month

 

 

Nasca^® Epoxy Putty is an hand-mixable and fast setting two part adhesive which are mixed by kneading.It is windely used in daily repair, machinery equipment and can bond, fill and rebuild with excellent bond strength. it does not shrink and it resistant to most common solvents. This putty can also be sanded, drilled and painted.

 

Application

 

SAFETY PRECAUTIONS
Wear gloves and wash hands after use.

 

PREPARATION
Surfaces should be clean and free from grease and oil. Slightly roughen the surface with a wire brush or sandpaper. Cut off desired length of Automotive Epoxy Putty and knead until uniform color is obtained.Putty turns a grey when completely mixed.

 

APPLICATION
Bonding metal,glass,ceramic,wood,many rigid plastics,china,tile,fiberglass,concrete and stone.
Can be combined with fiberglass cloth for a durable patch.

Recommended For:
Bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass,concrete and stone. Can be combined with fiberglass cloth for a durable patch.

Not Recommended For:
Polyethylene, polypropylene, Nylon,Teflon or flexible materials.
Applying at temperatures above 120°F (49°C)
Continuously wet areas or water immersion

 

CLEAN UP
Cured putty may be cut away with cautin using a sharp blade.

 

ADVANTAGES & FEATURES
*High impact resistance
*Won't crack when drilled
*Can be tinted
*Matches surrounding materials
*Water-resistant
*Can be used outdoors
*Will not shrink
*One-time application
*Convenient syringe
*Dispenses equal amounts of each component every time
*Sets in 10 minutes
*Quick completion of project

 

How to Use

STEP 1 Cut: Cut off a piece of epoxy putty that is large enough to complete the repair.

STEP 2 Mix: Using moist hands, carefully and thoroughly knead the two-component putty together to a uniform color.

STEP 3 Apply: Press putty firmly onto target area. If necessary, secure the putty using a clamp or similar device for 15-20 minutes. Epoxy Putty will harden in 1 hour and will reach full strength in 24 hours.

 

 
 

Products Lines

 

 

Certifications

We have registered trademark of " NASCA", " VISBELLA" , and also have passed ISO9001:2008 quality system authentication, BSCI factory Audit, and products also well approved by SGS, Reach, RoHs, MSDS etc. We also apply more than 60pcs patents, including 6 utility patents, over 20pcs model patents and 40 design patents. Please trust our professional and assured our quality.

 

 

Show Room

 

Company Information

 

RFQ

Contact us for more details. Reply within 24 Hours Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms that that you bought. Global Insurance Service Global insurance service guarantees the safety of iterms when installation and application. Compensation Policy Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.