Custom ESP32 CAM ESP32CAM Module Development Board OV2640 Camera Type C Grove Port 3D Wifi Antenna Mini Camera Board PCBA
- Category: Development Systems, and IoT Products >>>
- Supplier: Shenzhen Lonten Technology Co. Limited
Share on (1600221588794):
Product Overview
Description
Description:
The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing
the ESP32 Core.
The ESP32CAM equips the ESP32 with everything necessary to program, ran and develop on the wonder chip. It also features a LiPo
charger(IP5306), so your ESP32CAM project can be battery-powered and truly wireless. Additionally, the board reserved the MPU6050,
BME280 and an analog MIC.
1. IDF development environment, demo code: github.com/m5stack/esp32-cam-demo
2. Has the MPU6050 & bme280 pads on the board, can do DIY solder easily.
3. Has IP5306, can connect with lithium battery
Feature:
ESP32 specification:
-Dual-core Tensilica LX6 microprocessor
-Up to 240MHz clock frequency
-520kB internal SRAM
-4MB Flash memory
-Integrated 802.11 BGN WiFi transceiver
-Integrated dual-mode bluetooth(classic and BLE)
-Hardware accelerated encryption(AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
OV2640 sensor
-Output Formats(8-bit):
YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
-UXGA/SXGA: 15fps
-SVGA: 30fps
-CIF: 60fps
Scan Mode: Progressive
Camera specifications:
-CCD size: 1/4inch
-Field of View: 78 degree
Sensor best resolution: 1600*1200
Dimension: 25mmx24mm
Package included:
1 x M5Stack Official ESP32 Camera Module with type-c cable
The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing
the ESP32 Core.
The ESP32CAM equips the ESP32 with everything necessary to program, ran and develop on the wonder chip. It also features a LiPo
charger(IP5306), so your ESP32CAM project can be battery-powered and truly wireless. Additionally, the board reserved the MPU6050,
BME280 and an analog MIC.
1. IDF development environment, demo code: github.com/m5stack/esp32-cam-demo
2. Has the MPU6050 & bme280 pads on the board, can do DIY solder easily.
3. Has IP5306, can connect with lithium battery
Feature:
ESP32 specification:
-Dual-core Tensilica LX6 microprocessor
-Up to 240MHz clock frequency
-520kB internal SRAM
-4MB Flash memory
-Integrated 802.11 BGN WiFi transceiver
-Integrated dual-mode bluetooth(classic and BLE)
-Hardware accelerated encryption(AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
OV2640 sensor
-Output Formats(8-bit):
YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate
-UXGA/SXGA: 15fps
-SVGA: 30fps
-CIF: 60fps
Scan Mode: Progressive
Camera specifications:
-CCD size: 1/4inch
-Field of View: 78 degree
Sensor best resolution: 1600*1200
Dimension: 25mmx24mm
Package included:
1 x M5Stack Official ESP32 Camera Module with type-c cable
We Recommend
PL2303 USB To RS232 TTL Converter Adapter Module
US $1.25-$5.00
DCS 1842 MHZ Saw Filter EFCH1842TCA7
US $0.10-$10.00
70cm 3Pin Male Jumper Wire Cable for 3D Printer
US $0.10-$2.00
50A H-bridge High-power Motor Driver module IBT-4
US $5.00-$8.00
New Arrivals
New products from manufacturers at wholesale prices
