condensation cure silicone rubber tin cure rtv silicone rubber soft silicone rubber for mold making for artificial stone

Product Overview

Description

 

Condensation cure silicone rubber(RTV 2) Description

    DC-C25 liquid tin cure(condensation cure ) rubber is a kind of two part silicone rubber with mixing ratio of 100:2~10:1

    and the normal curing remperture is room temperture, so it is also call room temperture cure silicne rubber or RTV(Room temperature vulcanized silica gel)

   

 

Characteristics of condensation cure silicone rubber (RTV 2)

*excellent fluidity and good operability, easy to demold

* hihg tensile and tear strength  

* bubble releasing easily

*Non-deformation

*Low shrinkage

*Aging resistance ,high temperature resistance (220℃)

*Environmentally, food-grade

 

Application of condesation cure silicone rubber (RTV 2)

    condesation cure silicone rubber is mainly used for making molds . For Example, making mold for  concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping and tyre molds; ,candy and similar products.

 

condensation cure liquid rtv2 silicone rubber  Technical Parameters  (RTV 2)

 

Operation instructions

Step 1: prepare the original molds 

Prepare an perfect original mold and clean it totally before operation .

*Notes:Make sure your original molds(Model) and operation tool cleaned up totally to avoid uncure problem .

 

Step 2: Take 100 G part A and 2 G part B(catelyst ) (Or 100 G part A and 10 G part B) and mix them evenly.

 

Step 3: Vacuum pumping

Without exception, this step takes less than 8 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

 

Step 4: Pouring casting or Brush operation

*Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .

        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .  

        3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .

 

 

 

 

Package of the condensation silicone rubber (RTV 2)
1KG/tin, 3KG/drum,  5KG/drum,20KG/drum,25KG/drum, 200KG/drum